599093
20
Zoom out
Zoom in
Previous page
1/134
Next page
20
1. Löcher Ø 8 mm für Eckschrank anzeich-
nen, bohren und Dübel setzen.
A = 200 mm
B = 285 mm
C = 430 mm
Löcher Ø 6 mm für Eckabdeckung
anzeichnen, bohren und Dübel set-
zen.
D = 50 mm
E = 740 mm
2. Zulaufleitungen fachgerecht durch-
spülen, Eckventil eindichten, mon-
tieren und rundherum mit Silikon
versiegeln. Das Eckventil muss nach
oben zeigen.
3. Dübel für die Eckschrankmontage
mit Silikon versiegeln.
Den Eckschrank mit integriertem
Dampfgenerator mit den Schrauben
G (Holzschraube 6 x 45) und Unterlag-
scheiben H (A 6,4 x 18) anschrauben,
die vier Schrauben dabei nur leicht
anziehen.
4. Den Druckschlauch I für den Dampfge-
nerator ans Eckventil J anschließen.
Eckventil J öffnen.
MONTAGE ECKSCHRANK
1. Draw holes 8 mm diameter for cor-
ner cabinet, drill holes and insert
dowels.
A = 200 mm
B = 285 mm
C = 430 mm
Draw holes 6 mm diameter for corner
cover, drill holes and insert dowels.
D = 50 mm
E = 740 mm
2. Flush through the supply pipes, seal
the corner bracket, fit and seal with
silicone all around. The corner valve
must point upwards.
3. Seal dowels for corner cabinet instal-
lation with silicone.
Screw corner cabinet with integrated
steam generator on with screws G
(wood screw 6 x 45) and washers H (A
6.4 x 18), only tighten the four screws
lightly.
4. Connect pressure hose I for the steam
generator to corner valve J.
Open corner valve J.
CORNER CABINET
INSTALLATION
1. Segnare fori Ø 8 mm per l‘armadietto
angolare, forare ed applicarvi i tassel-
li.
A = 200 mm
B = 285 mm
C = 430 mm
Segnare fori Ø 6 mm per l‘armadietto
angolare, forare ed applicarvi i tassel-
li.
D = 50 mm
E = 740 mm
2. Collegare le uscite principali, montare
a tenuta la valvola angolare e renderne
stagno il perimetro utilizzando silicone.
La valvola angolare va posizionata
verso l'alto.
3. Sigillare i tasselli, per il montaggio
dell'armadietto angolare, utilizzando
del silicone.
Avvitare l'armadietto angolare con
il generatore di vapore integrato
utilizzando le viti G (vite per legno 6
x 45) e rondelle piatte H (A 6,4 x 18)
avendo cura di stringere le quattro
viti solo leggermente.
4. Collegare il tubo flessibile di pressi-
one I per il generatore di vapore alla
valvola angolare J.
Aprire la valvola angolare J.
MONTAGGIO DELL'
ARMADIETTO ANGOLARE
20


Need help? Post your question in this forum.

Forumrules
1

Forum

cleopatra-pharo-dl-40

Reset search

  • Mon générateur affiche A18 après avoir demonter l'appareil j'ai découvert que la sonde a niveau a complètement fondue
    Qu'elle peut-être la cause et comment reparer est-ce qu'il faut acheter une autre sonde

    Merci Submitted on 18-6-2021 at 19:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleopatra Pharo DL 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleopatra Pharo DL 40 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info