Manual Cleopatra Pareva 770 (page 23 of 36) (English, Dutch)

684031

Zoom out

Zoom in

1/36

3 Check before installation

Material 100% PMMA

Drain connection DN 50

(B) height of the bathtub in mm 625 - 645

Water drainage and supply

Connection of the water supply and water drainage must be carried out in accordance with the

applicable directives DIN 1988 / EN1717 and local regulations. After placing the bathtub, the

installer must check the leaktightness of the bath.

Check before mounting:

• Pay attention to the door width in the room where the bath is to be installed: is there

enough witdth for bath to be carried into the room?

• The bath may not be installed outdoors.

• The bath must be mounted on a floor suited for wet rooms.

• The floor must be strong enough to carry at least 550 kg / m². The floor must be level

and flat.

• Due to the design of the bath, a drain must be available in the floor. A drain in the wall

is not possible.

• The drain connection must be carried out in accordance with the currently valid standard

DIN 1986 / EN12056 and the local regulations.

• Before installation, the product must be checked for transport damage. No transport or

surface damage will be accepted after installation.

• The construction method of the bath may not be adjusted. Use only original parts.

• Only materials suited for the installation of a bathtub may be used!

• During assembly, gloves must be worn to prevent crushing and cutting wounds.

• No silicone containing acids may be used. The use of silicone containing acids may

damage the product.

• To fill the gaps between the elements, we recommend anti-fungal sanitary silicone. The

silicone may discolour after a while. If cleaning does not give sufficient results, the filling

must be replaced. This replacement is not covered by the warranty.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cleopatra Pareva 770 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cleopatra Pareva 770 Manual

Product: