462052

ClearOne VH20 Manual

335
Zoom out
Zoom in
Previous page
1/345
Next page
330
PROVISIONING THE CONVERGE VH20
Overview
This document describes the process of configuring a Converge VH20 using configuration files and compares this to
the use of the Converge Console software.
Automatic provisioning
By default the VH20 is configured to automatically get provisioning information from a TFTP server defined by the
DHCP server. This power on default behavior can be changed to configure from a different TFTP server or to stay with
current settings. These changes can be made through the Console software by changing the network settings for
ENETTFTPIP (for the TFTP IP address) or ENETPROV (for selecting source for provisioning).
If provisioning has been enabled, at boot time two files will be requested from the TFTP server. These files are named
as follows:
CLROVoipConfig.txt
and
CLROVoipConfig_[MAC address].txt
where [MAC address] is the 12 digit hexadecimal MAC address of the VH20 to be configured. Thus the first file can
contain settings general to all units and the second file can contain unique settings specific to a unit.
NOTE: Although the settings configuration file may appear to be well formed XML, it MUST adhere to the formatting as
defined in this example. Parameter settings CANNOT be spread across multiple lines.
For example:
Valid
<username> admin </username>
Invalid
<username>
admin
</username>
Also, since there are two proxies, each proxy tag can take an index value of 0 or 1 for the primary or secondary proxy.
Those tags that take a proxy index are shown within the tag field with index=n where n = 0 or 1. For example, the tag
to enable the primary proxy sip authentication would be:
<use_sipauth index=0> 1 </use_sipauth>
A sample CLROVoipConfig.txt file containing configuration settings is shown below. After the sample file is a complete
list of tags and the ranges allowed.
APPENDIX F: PROVISIONING THE CONVERGE VH20
… 335 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne VH20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne VH20 in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info