462054

ClearOne SR 1212TA Manual

129
Zoom out
Zoom in
Previous page
1/345
Next page
124
The Gain slider changes the gain for the telco receive channel from nominal 0. To change the value, use the slider
or the selector box. Range is from -65 to +20dB in .5dB increments. The default is 0dB.
Min/Max Limits
Use the yellow and green upper and lower limit arrows on the Gain Scale in the Gain section of the screen to set
minimum and maximum gain level limits. These limits only apply when using relative gain commands; absolute gain
commands can exceed the min and max limits. Min/Max limits apply to all serially connected control devices and
prevent users from adjusting levels beyond the specified levels.
Post-Gain Meter
The Post Gain level meter displays the post-gain signal level in dB.
Channel Routing Matrix
The channel routing matrix section of the Channel screen shows the associated matrix row and audio routing
configuration for the selected input channel (telco/VoIP rx in this case). Clicking a cross point box selects it, clicking
it a second time sets the cross point, as indicated by a green box. The dB level for set cross points is shown
numerically in the box.
For telco/VoIP rx channels, Outputs 5-8, Speaker, and To Exp. Bus S are selected as cross points by default. You
can click directly on any cross point box in the top row to a cross point (routing path), or leave it blank, as required
for your installation.
To adjust cross point gain/attenuation, right-click on a cross point box and select Cross Point from the shortcut
menu.
… 129 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne SR 1212TA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne SR 1212TA in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info