462050
326
Zoom out
Zoom in
Previous page
1/345
Next page
321
CONVERGE SR 1212A
Audio Performance:
Conditions: Unless otherwise specified, all measurements
are performed from from 20 HZ to 22 kHz BW limit (no
weighting)
Frequency Response: 20 Hz to 22kHz +- 1 dB•
Noise(EIN): -126 dBu, 20 kHz BW, max Gain•
Rs= 150 ohm•
THD+ Noise: <.02%•
Dynamic Range: >105 dB (non A weighted)•
Crosstalk: <91 db re 20dBu @ 20 kHz channel to •
channel.
Audio Mixer Parameters
Number of Open Microphones
•
PA Adaptive Mode•
First Mic Priority Mode•
Maximum # of Mics•
Ambient Level•
Gate Threshold Adjust•
Off Attenuation Adjust•
Hold Time•
Decay Rate•
Chairman Override•
96 Total Microphones per site•
6- Global Gating Groups•
4- Internal Gating Groups•
Matrix Mixing Parameters
8- Microphone Analog Inputs•
4- Analog Line Inputs•
8-Analog Line Outputs•
4- Power Amplifier Outputs•
18- Expansion Bus in/out•
8- Processing Blocks•
Assignable Processing Blocks
Filters:•
All Pass »
Low Pass »
Low shelving »
High shelving »
PEQ »
Notch »
Crossovers »
Compressor•
Delay up to 250 msec•
Power Amplifier Output Processing
Feedback Elimination w/ ring cancellation•
10-band EQ filter •
4- node filter bank for crossover•
Delay Block•
Compressor/Limiter•
Noise Gate for Hiss Control•
Sound Masking Generator per channel•
Adaptive Volume Control•
Multi Channel Control•
Microphone Processing
4-node filter bank•
AGC/.ALC•
Power Amplifier
Channels: 4•
Amplifier Output: 35-Watt into 8 ohm•
Impedence: Selectable 8ohm, 70V, 100 V•
THD+ Noise: <.2% (1/3 Power)•
Crosstalk: <-68dB•
Expansion Bus
Connection: CAT 5, RJ45•
Mix Minus Structure•
18 Audio Buses•
6 Gating Buses•
8 PA Reference Buses•
Network
10/100 Auto Switching (PC and Network Port)•
HTTP Server•
Telnet Client•
SNMP Agent•
SNTP Client•
DNS•
DHCP•
RS-232
DB-9•
9.6k – 115k baud•
8/1/0 •
Hardware Flow Control•
USB
2.0 Compatible•
Type B connector•
GPIO
DB 25 female (A/B)•
Inputs: Active Low•
Outputs: Open Collector, 40Vdc, 40 mA•
Power
100-240VAC; 50/60 Hz,•
300 Watts (maximum)•
Environmental
Operating temperature: •
32-122 degrees F•
Humidity:
15 to 80%•
Mechanical
Dimensions: 2RU•
3.5” H x 17.25” W x 15.92” D•
Weight: < 30 lbs.•
Compliance
EMC- FCC Part 15 Class A•
EMI – EN55024 •
Safety - IEC60950, CSA, CCC•
Class 2 Wiring Required•
326


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 8i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 8i in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info