462050
311
Zoom out
Zoom in
Previous page
1/345
Next page
306
The 3.X versions of Converge Console offer significant upgrades from previous versions. ClearOne strongly
encourages users to upgrade all firmware to the latest release version.
Converge Console detects the version of the Site’s current firmware and determines whether or not it requires a
firmware upgrade. If the connected Site contains units that are Version 3.X, they must be remove from the expansion
bus prior to performing the firmware upgrade. Please follow the steps below to upgrade your Firmware:
Step 1: Remove any 2.X and 3.X units from the stack by disconnecting the expansion bus link cable from the 1.X units.
Step 2: Re-connect to the 1.X stack with Console.
Step 3: Download the 2.X firmware file to the stack of units.
Step 4:
Step 5: Reconnect to the stack with Console. Download 3.X a second time to the units. The units will reboot.
Step 6: Units are fully upgraded
Step 7: Verify units have been upgraded by check firmware version on the front panel.
Step 8: Remove any 3.X units from the stack by disconnecting the expansion bus link cable from the 2.X units.
Step 9: Re-connect to the 2.X stack with Console
Step 10: Download the 3.X firmware file to the stack of units
Step 11: Units are fully upgraded
Step 12: Verify units have been upgraded by check firmware version on the front panel
The units will default and reboot after the download of 3.X firmware. The 1.X to 3.X upgrade requires the
firmware to be loaded twice to complete the version upgrade.
APPENDIX C: FIRMWARE LOADING PROCEDURE
311


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 8i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 8i in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info