462050
257
Zoom out
Zoom in
Previous page
1/345
Next page
252
FEM – Feedback Elimination Mode
This command set the feedback mode to either Music or Voice. This effects how aggressive the reduction is.
Command Form: DEVICE FEM<Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 23 (J)
Value Unsigned Float 2 0 = Locked
1 = Unlocked
Default 0
(Null to query in text)
FEN – Feedback Elimination Nodes
This command reports the total number of filter nodes (fixed and dynamic) currently being used for the feedback
cancellation. This is a query only command.
Command Form: DEVICE FEN<Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 23 (J)
Value Unsigned Short 2 Total Nodes
(ALWAYS NULL IN TEXT)
FER – Feedback Elimination Node Reset
This command resets both the fixed and dynamic filters on the feedback eliminator. There is no query associated
with this command.
Command Form: DEVICE FER<Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 23 (J)
Value Unsigned Short 2 Zero
FERNG – Feedback Elimination Ring Elimination Mode
This command enables/disables the Ring Elimination Mode on the feedback eliminator.
Command Form: DEVICE FERNG<Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 23 (J)
Reserved Zero 2 0 = 0ff
1 = On
2 = Toggle
(Null to query in text)
FES – Feedback Elimination Setup
This command reset the feedback eliminator and initiates an automatic training cycle. When the automatic setup
is complete, the FESC (Feedback Elimination Setup Complete) command will be issued. There is no query
associated with this command.
Command Form: DEVICE FES<Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
257


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 8i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 8i in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info