462050

ClearOne PRO 8i Manual

233
Zoom out
Zoom in
Previous page
1/345
Next page
228
APPENDIX A: APPLICATION PROGRAMMER’S INTERFACE
TYPE AND DEVICE IDS
Converge/Converge Pro Device Types and Device IDs by model are as follows:
Model Device Type Device ID Range
880 1 0-B
TH20 2 0-F
VH20 E 0-F
840T 3 0-B
8i A 0-B
880T D 0-B
880TA H 0-B
SR 1212 G 0-B
SR 1212A I 0-B
CONVENTIONS
This guide uses the following typographic conventions to describe Converge/Converge Pro serial command syntax:
Convention Description
<X> Parameters enclosed in < > indicate a mandatory parameter
[X] Parameters enclosed in [ ] indicate an optional parameter
1-8 Parameters separated by a ‘-‘ indicate a range of allowable values
4,7,9 Parameters separated by a ‘,’ indicate a list of allowable values
EREF Words in UPPERCASE bold indicate command text
Device Indicates the device type and device number on the Expansion Bus. It is
composed of a device type character and a device ID character.
COMMAND FORM DESCRIPTION
The structure of serial commands is as follows:
# <Device Type> <Device ID> <Command> [Values] <Carriage Return>
# indicates the start of a command line, the Carriage Return terminates a command.
NOTE: Serial commands can be either UPPERCASE or lowercase. Return values are always in
UPPERCASE. In order for a command to be recognized by the RS-232 serial port, the
command must be terminated by a carriage return.
For example, a command to disable mute for Mic Input 5 on a Converge Pro 880 with a Device ID of 2 would have
the command line #12 MUTE 5 M 0.
In this command line, 1 = the Device Type for Converge 880, 2 = the Device ID for unit 2, MUTE = serial
command, 5 = the channel Value, M = the channel type Value for mic input channels, and 0 = the command
Value that turns mute off.
If an asterisk (*) is placed in the Device Type or Device ID fields, the command will apply to all units or all devices
respectively. For example, a command with a Device Type = 1 and a Device ID = * would apply the command to
all Converge 880 units. A command with a Device Type = * and a Device ID = 6 would apply the command to all
units with a Device ID of 6.
… 233 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 8i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 8i in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info