462047

ClearOne PRO 880T Manual

256
Zoom out
Zoom in
Previous page
1/345
Next page
251
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 23 (J)
Reserved Zero 2 Value:0-16
(Null to query in text)
Nodes
FEF – Feedback Elimination Fixed Filter
This command sets the number of fixed filter to use in the feedback eliminator. The fixed filters number will be used
during the initialization phase when gain is increased until feedback occurs. A fixed filter will be set at the feedback
point during the initialization.
Command Form: DEVICE FEF<CHANNEL> <GROUP> [VALUE]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 23 (J)
Reserved Unsigned Short 2 Zero
FEG – Feedback Elimination Auto Gain Max
This command sets the target gain for auto setup in feedback cancellation.
Command Form: DEVICE FEG<Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 23 (J)
Reserved Unsigned Short 2 0 - 8
(Null to query in text)
dB
FEGL – Feedback Elimination Gain Level
This command reports the gain value achieved at the end of the feedback automatic setup. The maximum value
possible is set in the FEG command. This is a query only command.
Command Form: DEVICE FEGL<Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 23 (J)
Value Signed Float 2 -99.99 to 99.99
(Sent with Null, value returned)
dB
FELD – Feedback Elimination Lock Depth
This command sets the operation of a fixed filter node to be either locked or unlocked. In locked mode, the fixed
filter’s depth will remain the same after all the fixed filters are placed. In unlocked mode, the fixed filter’s depth can
be modified anytime until the maximum depth is achieved.
Command Form: DEVICE FELD<Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 23 (J)
Value Unsigned Float 2 0 = Locked
1 = Unlocked
Default 0
(Null to query in text)
… 256 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 880T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 880T in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info