462047
193
Zoom out
Zoom in
Previous page
1/345
Next page
188
5. Set the output channel cross points that you want to include in the preset using the matrix.
6. Configure the desired setting changes for the preset including:
Mic Input, Line Input, Output, Telco/VoIP rx, Telco/VoIP tx, Processing, and Fader channel settings•
Gating settings•
Control settings•
AEC/PA Adapt Reference settings•
7. Click on the Preset Mask Control/Status B boxes to set the pin states (H = High, L = Low) required to
trigger preset execution (optional). See Preset Control Masking for more information.
8. Press the Macro Selection button to execute one or more macros when the preset executes (optional).
NOTE: In most cases, macros should not be used in a preset unless you want to run a serial
command. Some examples that require a macro include querying device status when a
preset executes, and sending a command string to an external control device to indicate
preset/room configuration status. Also, macros execute at the end of a preset after all
other routing, level, and configuration changes included in the preset are completed.
9. Press the Save button to save the preset
10. Click the Exit button to exit preset mode and return to configuration mode.
The preset is now available for execution as described below.
193


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 880T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 880T in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info