462047

ClearOne PRO 880T Manual

156
Zoom out
Zoom in
Previous page
1/345
Next page
151
Press the Clear Matrix button to clear ALL current matrix settings. A Confirm dialog appears asking you to confirm
the clear matrix operation. Use caution when using this feature because the operation cannot be undone.
Audio Routing Matrix
The numbers and letters along the top and left side of the matrix show the cross point coordinates. The Labels for
each channel are also shown to make them easy to identify. As you move the cursor over the matrix, the labels for
the channels are highlighted in white for each cross point.
NOTE: Clicking on a channel label opens the Channel screen for that channel, allowing you to
modify the channel label and change channel configuration settings as needed.
Input Routing
To route an input to an output, click in the routing matrix at the intersection between the input and the output. A mic
input can be designated as gated (yellow), non-gated (blue), or pre-AEC (brown) by clicking repeatedly in the cross
point. All other input cross points will be colored green.
Expansion Bus I–Z Routing
Audio from any unit on the E-bus network can be placed on the bus or taken off the bus and routed to any
destination within the unit.
All models have 18 digital mix-minus buses:
S–Z Buses: • These eight audio buses are line input mixer buses. They are used to route auxiliary audio, such
as from a CD player or VCR, to and from other units on the network. These buses are also used as mic mixer
buses when NOM count is not required.
I–R Buses• : These ten audio buses are generally used for routing microphone audio between Converge/
Converge Pro devices. Information about the number of gated microphones (NOM count) and other relevant
information for the microphone mixers are tracked for microphones routed to these buses. By default, all
microphones are routed to the O bus.
Process A–D (840T) and Process A–H (880, 880T, 880TA, 8i, SR 1212, SR 1212A) Routing
There are four processing channels on the Converge Pro 840T, eight on the 880, 880T, 880TA, 8i, and eight on
… 156 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 880T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 880T in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info