462047

ClearOne PRO 880T Manual

152
Zoom out
Zoom in
Previous page
1/345
Next page
147
Gain Slider & Post Gain Meter
Adjusts output gain level. Use the Gain slider to adjust output volume level. You can also enter the level directly in
the selector box. The Post Gain meter reflects the post-gain level of the signal in dB.
Min/Max Limits
Use the yellow and green upper and lower limit arrows on the Gain scale to create minimum and maximum gain
level limits. These limits only apply when using relative gain commands; absolute gain commands can exceed the
min and max limits. Min/Max limits apply to all serially connected control devices and prevent users from adjusting
levels beyond the min/max levels.
Channel Routing Matrix: Faders
The channel routing matrix shows the Matrix row and audio routing configuration for the selected channel (Fader
1 in this case). Clicking a cross point box selects it, clicking it a second time sets the cross point, as indicated by a
green box. The dB level for set cross points is shown numerically in the box
You can click directly on any cross point box to set a cross point, or leave it blank, as required for your installation.
To adjust cross point gain/attenuation, right-click on a cross point box and select Cross Point from the shortcut
menu.
The Cross Point Attenuation slider appears. Move the slider or use the selector box to set the gain/attenuation
level in dB. The range is from -60 to 12dB in .5dB increments. The default is 0dB.
… 152 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 880T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 880T in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info