462047
137
Zoom out
Zoom in
Previous page
1/345
Next page
132
As shown above, the Center Pane displays a signal flow diagram for the telco/VoIP tx channel, real-time peak-
level meters, as well as the channel routing matrix, which shows the audio routing configuration for the channel.
Configuration settings for the telco/VoIP tx channel are displayed as controls (buttons, sliders, etc.) which are
located at the appropriate stage in the signal flow.
The following sections describe how to use these controls to configure telco transmit settings for your installation.
Channel Label
Rename the channel by entering a name in the Label entry field (optional). Label changes are global, and appear
throughout Console wherever the label is referenced.
Dialer Button
The Dialer button opens the telephone dialer (shown below), allowing you to place calls to establish a conference
call with a remote location.
See Dialer for more information on using the dialer and its features .
NOM (Number of Open Mics/Constant Level)
Maintains a constant output level by automatically adjusting gain levels based on the number of mics gated on
and routed to the selected output channel. NOM reduces the output level proportionally by 3dB for every doubling
in the number of open mics. When using NOM over the expansion bus, only I – R Buses support passing NOM
information. The default is On.
Mute Button
Clicking the Mute button toggles muting. The default is Off.
137


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 880T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 880T in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info