462047

ClearOne PRO 880T Manual

108
Zoom out
Zoom in
Previous page
1/345
Next page
103
Gating Settings: Auto Gating
The upper section of the Gate Settings section of the screen contains the gating controls for Auto Gating as shown
below.
Auto Gating: Settings
Gate Ratio• : Specifies how much louder than the ambient level the audio level must be before the channel
automatically gates on. The gate ratio range is from 0 to 50dB. The default is 15dB.
Hold Time• : Determines how long the channel stays gated on after the audio falls below the Gate Ratio
threshold. The hold time range is from .1 to 8.0 seconds. The default is .3 seconds.
Off Attenuation• : Sets the amount of level reduction applied to a channel when it is gated off. The range is
from 0 to 60dB. The default is 12dB.
Decay Rate• : Determines how fast a channel gates off after the Hold Time expires. The default is Medium.
NOTE: Changing Hold Time, Off Attenuation, and Decay Rate also changes the same settings
under Manual Gating.
Auto Gating: Ambient Tracking
Adaptive Ambient• : Adjusts the ambient reference level as noise and room conditions change. When
Adaptive Ambient is on, the mic channel monitors the ambient noise level on the input and adjusts the
ambient level reference automatically. This means that the gate threshold level automatically increases or
decreases based on background noise. The default is On.
Manual• : When Adaptive Ambient is set to Manual, the input will use the fixed ambient level you specify in
the Ambient Level field as its gating reference.
Auto Gating: Processing Functions
Chairman Override• : Provides gating priority for this mic input over any other mic input within the same
gating control (mixer) group. When a mic with Chairman Override enabled gates on, all mics which do not
have Chairman Override enabled will gate off. The default is Off.
PA Adaptive Mode• : Uses the audio level on a specified output as the new ambient level when audio is
present at the power amplifier. This prevents loudspeaker audio from gating on the mic while still allowing
people in the room to gate on microphones when they speak (provided that their voices are louder than
the loudspeaker audio). For example, you might decide to play background music from a CD player during
a presentation. PA Adaptive Mode allows you to use the output routed from the CD player as the ambient
reference to prevent the CD player’s audio from gating on microphones. The default is on.
PA Adapt and AEC Reference• : When PA Adaptive Mode is selected, you must define the output that will
be used as the reference source for PA adaptation and Acoustic Echo Cancellation (AEC). Select a source
in the PA Adapt and AEC Reference drop-down list. You can use any one of the outputs, expansion bus
references, virtual references, or speaker output channels as the reference.
Gate Settings: Manual Gating
The lower section of the Gate Settings section of the screen contains gating configuration controls for Manual
Gating as shown below.
… 108 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 880T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 880T in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info