Manual ClearOne PRO 880T (page 90 of 345) (English)

462047

Zoom out

Zoom in

1/345

Multichannel Control• : Multichannel Control is only available on amplifier channels. Each of the 4 amplifiers

can be assigned to one of two Multichannel groups. When amplifier channels are assigned to a Multichannel

group, Mute and Gain for the group are controlled from a single point.

NOTE: Mutiple PA Channel Selections cannot be applied to both groups simultaneously. If you assign

PA 1 and 3 to Multichannel Group1, those amplifiers cannot be assigned to Multichannel Group 2 without

removing them from the first group.

Volume• : Indicates the volume level assigned to the Multichannel Group

PA Channel Selection• : Each box represents a PA Channel. Check the box you wish to assign to the

corresponding Multichannel Group.

Mute• : Mutes the Multichannel Group

Enable Adaptive Volume• : When enabled the level of the PA Channel will adjust based on the Noise

Floor “heard” by the selected reference microphone. As the level of noise changes, the output level

adjusts according to the selected PA Gain to Ambient Change Ratio. For example, if the rate is set to 2:1

the amplifier level will adjust by 2 dB for every 1 dB in noise for increase. The gain applied is governed by

the Maximum Gain setting. Before any gain is applied the noise floor heard by the mic must be equal to or

greater than the Adaptive Gain setting.

For more information, refer to the Table of Contents for these related topics:

AEC (Auto Echo Cancellation)•

NC (Noise Cancellation)•

Configuration Mode•

Channel Tab•

Matrix Tab•

Processing Settings•

Fader Settings•

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 880T in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ClearOne PRO 880T Manual

Product: