462047
74
Zoom out
Zoom in
Previous page
1/345
Next page
69
Local Cert• : Click the Browse button to upload your Local Certificate file
CA Certs• : Use the Add or Del buttons to add or remove CA Certs
Timers
Timers are used to keep SIP sessions “alive” on the network. Normally, default values are appropriate.
Occasionally your Network Administrator may want to customize the settings. Do not change these settings unless
directed to do so.
All Values are in milliseconds unless otherwise noted.
Use SIP Session Times• : This box is checked by default. Removing the check will disable all timers.
Refer Timeout• : Number of ms the server waits for a reply
Retransmission Timers• : Refers to three Timers
T1• : Sets the round-trip time for a packet
T2• : Sets the retransmit time from a non-invite request (REFER, BYE, etc.) and INVITE resonses
T4• : Sets the total time a given message can be on the network
Session Expires Timer• (Value is listed in Seconds): Default time before the current session expires due to
inactivity. This value MUST be greater than the Min SE Timer value.
Min SE Timer• (Value is listed in Seconds): Minimum Session Timer
Register Timeout• (Value is listed in Seconds): The period of time a given device is registered on the
network.
Network
The Network tab allows the user to set basic network settings. Have your Network Administrator modify these
settings.
Provisioning• : Provides the VH20 with access to data and network resources by receiving authorization
and privileges via resource management.
Use local settings• : The unit uses local settings provided by the server
Use DHCP/TFTP• : User provides settings for the VH20 to gain access to the network
TFTP• from DHCP: TFTP settings are received from the server.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 880T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 880T in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info