462049
35
Zoom out
Zoom in
Previous page
1/345
Next page
30
Converge Pro Rear Panel Connectors
AC Power1. : IEC connector, 100 – 240VAC auto-adjusting, 50/60Hz.
Warning: This equipment must be connected to an AC mains socket outlet with a protective
earthing connection. The third prong of this connector (ground) is an important safety feature. Do not
attempt to disable this ground connection by using an adaptor or other method.
Mic/Line Inputs2. : Mini-terminal push-on block connector for any combination of microphone and/or line
level inputs. (Converge Pro 880: 8 inputs. Converge Pro 880T: 8 inputs. ConvergePro 880TA: 8 inputs.
Converge Pro 840T: 4 inputs. Converge Pro 8i: 8 inputs. Converge Pro TH20, VH20: 0 inputs. Converge SR
1212: 8 inputs. Converge SR 1212A: 8 inputs.)
Line Outputs3. : Mini-terminal push-on connector for line-level outputs (880, 880T, 880TA, 840T, SR 1212, SR
1212A).
Line Inputs4. : Mini-terminal push-on block connector for line level inputs only. (Converge Pro 880: 4 inputs.
Converge Pro 880T: 4 inputs. Converge Pro 880TA: 4 inputs. Converge Pro 840T: 4 inputs. Converge Pro 8i:
4 inputs. Converge Pro TH20, VH20: 2 inputs. Converge SR 1212: 4 inputs. Converge SR 1212A: 4 inputs.)
Line Outputs5. : Mini-terminal push-on block connector for line-level outputs (880, 880T, 840T, TH20, VH20,
SR1212).
Link In and Link Out Ports6. : Two RJ-45 E-bus (expansion bus) connectors used to connect
multiple Converge Pro units together to create a site. You can connect up to twelve Converge Pro
840T/880/880T/880TA/8i/SR 1212/SR 1212A units, up to 16 Converge Pro TH20/VH20 units, or any
combination thereof, where the total number of microphone inputs does not exceed 96. Maximum cable
length is 200 feet using Category 5 unshielded twisted pair cable.
WARNING: Use the Link In and Link Out ports with Converge Pro Devices ONLY. Connecting
ANY other devices to the Link In and Link Out ports, including ClearOne XAP or PSR1212
products, or Power Over Ethernet (PoE) devices, will result in severe equipment damage.
RS-232 Serial Port7. : Female DB9 connector for connecting to a laptop, computer, or remote control serial
devices (such as AMX and Crestron controllers).
NOTE: Converge Console software cannot connect via the RS-232 port; use USB or
Ethernet.
Control/Status A and B Ports8. : Two female DB25 connectors used for GPIO interactions between
Converge Pro devices and external control devices (such as wall switches and push-to-talk microphones).
This enables external devices and controller software to access the Converge Pro command set, including
common functions such as volume control, muting, room combining, and preset changes.
PC and LAN Ethernet Ports9. : Two RJ-45 10/100Mbps auto-sensing Ethernet ports. The LAN port connects
Converge Pro devices to a network. The PC port provides a pass-through network connection for use with
a standard (not crossover) patch cable. The LEDs adjacent to each port indicate connection status and
packet traffic activity.
Speaker Posts (880T, 840T)/Amplifier Terminal Block (880TA, SR1212A)10. :
880T,840T--Twopost/bananaplugconnectorsusedtoconnectanexternalspeaker(4Ω–16Ω).•
Internal power amplifiers eliminate the need for an external power amplifier.
880TA,SR1212A--8speakerterminalsusedtoconnectanexternalspeaker(8Ω).Four,35Watt•
internal power amplifiers eliminate the need for an external power amplifier.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 840T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 840T in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info