462049
8
Zoom out
Zoom in
Previous page
1/345
Next page
3
Enhanced expansion bus (E-bus) capabilities—connect up to 34 Converge Pro units together and use up to •
96 microphones and 16 telephone lines in a single Converge Pro installation.
Increased distance between units—up to 200 feet/60.96 meters.•
Graphical, user-configurable routing matrix allows you to route any input channel to any output, processing, •
or fader channel (or combination thereof) on any Converge Pro unit, or across the expansion bus.
Front panel control of mute and gain for all input and output channels.•
Safety mute button on the Console™ software button bar instantly mutes all outputs.•
ClearOne’s DSP (Digital Signal Processing) technology ensures crystal-clear audio between conferencing •
sites.
AEC (Acoustical Echo Cancellation) Enhancements
Smoothing filters to reduce artifacts•
Pre-AEC bypass channels•
Improved AEC adaption and noise suppression algorithms•
Automated Push-to-Talk microphone mode with AEC freezing•
Gain and gating control tracking•
Cross point gain adjustments•
Four fader channels•
Microphone preamp gain control•
7 dB coarse gain and .5 dB fine gain increments for improved microphone gain matching•
AGC (Automatic Gain Control) algorithm•
ALC (Automatic Level Control) algorithm•
Telephone Hybrid Enhancements (880T, 880TA, 840T, TH20)
Custom telephone line settings for international teleconferencing and in-country localization•
Type I & Type II auto-sensing telephone interface (U.S. and E.U.)•
International impedance matching•
Improved TEC (Telco Echo Cancellation) with 31 millisecond tail time•
Continual TEC adaptation to telephone line conditions•
ClearEffect™ wideband audio emulation algorithm•
Digital anti-alias filter minimizes CO switching noise and hum•
ALC (Automatic Level Control) on telco receive channel•
Improved call management and processing•
Adjustable dial tone, DTMF attenuation•
Off-hook DTMF generation•
Robust dial tone detection•
Caller ID & selectable ringers•
Touch-tone dialing capability (44 character dial string)•
Analog telephone line compatibility•
10 W speaker amplifier (880T, 880TA, 840T)•
Custom ring cadence detect•
VoIP and SIP Functionality (VH20)
Voice over Internet Protocol functionality - Providing telephone functionality over an Internet connection•
SIP - Session Initiation Protocol used to establish, modify and teminate VoIP calls•
Support for wideband Audio – G.722•
ClearEffect™ wideband audio emulation algorithm•
ALC (Automatic Level Control) on telco receive channel•
Caller ID & selectable ringers•
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ClearOne PRO 840T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ClearOne PRO 840T in the language / languages: English as an attachment in your email.

The manual is 10,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info