650346

Cleanmaxx Z 09860 - HZ-01 Manual

21
Zoom out
Zoom in
Previous page
1/48
Next page
21 EN
Use
Preparing the Room
CAUTION!
■ If you are using the device in a room for the fi rst time, keep an eye on it in case you
need to remove any obstacles so that the device can effectively clean the entire room.
• Remove any objects from the fl oor that may get caught in the nozzle (13) or prevent
the device from cleaning. In particular, do not leave plastic bags on the fl oor.
• Make sure that no cables, cords, or fringes, for example from curtains or tablecloths,
are in the path of the device.
• Remove all objects that could be tipped over (e.g. vases, small lamps, decorations).
• The distance between two objects (e.g. wall and shelf) must be at least 40 cm so that
the device can get through.
• The device can get stuck under furniture which it can just about get under. Block its
path, for example, with fl ower pots that are heavy enough not to get knocked over.
Starting the Device
1. Make sure that the dust container (1) is empty, the device is free of any contamination
(see the "Cleaning, Maintenance Work and Storage" chapter) and the battery is
charged up.
2. If necessary, fi x a dust cloth to the attachment for the dust cloth (10) if you want to use
the device on hard fl oors, or remove the attachment for the dust cloth (see the “Using
the Dust Cloth” section) if you want to use the device on a carpet.
3. Place the robot vacuum cleaner on the fl oor.
4. To switch on the robot vacuum cleaner, move the On/Off switch (4) to position I.
5. To switch off the robot vacuum cleaner, move the On/Off switch to position 0.
6. After each use, empty the dust container and remove any contamination (see the
"Cleaning, Maintenance Work and Storage" chapter).
Cleaning, Maintenance Work and Storage
CAUTION!
■ During cleaning and maintenance work, the device must not be connected to the
mains power and must be switched off!
■ Only the dust container may be rinsed out. The device must not be immersed in water
or any other liquids. Make sure that all parts are completely dry before you insert the
dust container back into the device!
■ Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface.
1. Before and after every use, make sure that
– the nozzle and ventilation openings are clear,
– the sensors on the bottom of the device are clear of dust etc.,
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 09860 - HZ-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 09860 - HZ-01 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info