646277
16
Zoom out
Zoom in
Previous page
1/48
Next page
EN 16
Risk of electric shock and re
Do not use the device if easily ammable gases are present in the air.
Do not touch the device with wet hands. Do not use the device outdoors or in rooms
with a high humidity.
Never vacuum up liquids. Do not ll the dust bin with liquids.
Only use the device in dry, indoor spaces.
Immediately switch off the device in the event of damage/faults (e.g. unusual noises,
odours or if smoke is emitted).
Never carry or pull the device by the cord, always handle the cord with care. Avoid
catching the cord in doors and pulling it across sharp edges or corners. Keep the
cable away from hot surfaces.
Only connect the device to a socket, whose mains voltage complies with the data on
the speci cation plate. The socket must also be easily accessible after the device has
been connected.
For your own safety, check the device for damages each time before using it. Only
use the device if it doesn’t exhibit any damages!
Turn the device off and pull the mains plug out of the socket
in the event of a storm,
if liquids or debris end up in the device.
If you wish to pull the mains plug out of the socket, never pull on the cable, but always
on the plug. Only take hold of the mains plug when your hands are dry.
Avoiding damage to materials, property and the device
Keep an eye on the dust bin’s MAX mark. If the max mark has been reached during
use, empty the dust bin before you continue vacuuming.
Empty the dust bin after every use. The lters must also be cleaned regularly to pre-
vent the motor from being overloaded.
After being washed out, the dust bin and the lters must be completely dry before
they may be reinserted.
Only use the device if it has been completely and correctly assembled! The dust bin
and the lters must be in place and undamaged! Dirt that penetrates the inside of
the device could damage the motor. The dust bin must be shut in order for it to be
inserted properly.
Do not insert anything in the openings/nozzle of the device and make sure that they
are not plugged.
Only use original spare parts provided by the manufacturer.
Never expose the device to extreme temperatures, severe temperature uctuations,
open ames, direct sunlight, moisture or wetness.
Do not allow the device to fall and do not subject it to strong percussions.
Store the device in a dry place at temperatures between 0 and 40 °C.
Never cover the vents.
Protect the device against heat, open ames, direct sunlight, moisture and percus-
sions. Make sure there is no risk of the device falling down.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 09858 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 09858 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info