646263
22
Zoom out
Zoom in
Previous page
1/48
Next page
EN 22
Cleaning the Filter
1. Detach the dust container from the motor unit (see the "Attaching and Detaching Ac-
cessories" chapter, "Removing and Inserting the Dust Container" section).
2. Empty the dust container (see above).
3. Turn the lid of the dust container anticlockwise and remove it.
4. Carefully remove the cyclone lter (E) from the dust con-
tainer.
5. Remove the foam lter holder (F) from the cyclone lter.
6. Remove the foam lter (G) from the lter holder.
Please note: The thin fabric lter is rmly attached to the
lter holder and cannot be taken out of the holder!
7. The cyclone lter can be taken apart to make it easier to
clean: Twist the inner cyclone insert a little in order to re-
lease it, and then remove it.
8. Tap out all the parts over a dustbin and brush off the loose
dirt.
9. You can wipe down the parts of the cyclone lter and the dust container with a damp
cloth.
10. If necessary, thoroughly rinse the foam lter and the lter holder with clear, lukewarm
water. CAUTION: Do not use any cleaning agent! Never wash in the dishwasher
or in the washing machine!
Then shake off any excess water and allow the lter and lter holder to dry com-
pletely in the air before reinserting them.
11. Once all parts are dry, rst assemble the cyclone lter. There are arrows marked on
both parts of the cyclone lter. Assemble the parts so that both arrows point towards
one another and then twist them rmly together.
12. Place the dry foam lter into the lter holder and then place this onto the cyclone lter.
CAUTION: Under no circumstances should you assemble parts of the device
that are still damp!
13. Place the cyclone lter into the dust container. Make sure
that it is correctly recessed and can no longer be rotated.
14. Place the lid onto the dust container and twist it shut.
15. Attach the dust container to the motor unit.
Cleaning the Motor Unit, Nozzles and Telescopic Tube
If necessary, clean the motor unit, nozzles and the telescopic tube using a slightly
damp, soft cloth. Dry them with a soft cloth.
Remove hair and uff from the nozzles at regular intervals.
Storage
Store the device in a cool, dry place out of the reach of children and animals.
E
F
G
09668_de-gb-fr-nl_V1.indb 2209668_de-gb-fr-nl_V1.indb 22 08.09.2015 16:28:5908.09.2015 16:28:59
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 09668 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 09668 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info