646268
24
Zoom out
Zoom in
Previous page
1/56
Next page
24
Operation
ATTENTION!
During use, always keep the nozzles away from body parts and animals and do not
reach into them. You could be caught or injured. If something does get caught in the
vacuum cleaner, turn it off immediately (depress the On/Off switch ).
Only turn on the vacuum cleaner once you are sure that all parts have been
completely mounted and that the dust bin, dust lter and the exhaust lter have been
properly inserted.
To prevent the cord from becoming too hot when in use, pull at least two thirds of
its entire length out of the device before you switch on the vacuum cleaner. Do not
forcefully pull out the cord up to the stop point (no further than up to the red mark on
the cord) in order to prevent damage!
Always turn off the device rst and pull the mains plug out of the socket before you
change a nozzle or attach or remove other accessories!
Do not in any case vacuum up the following:
Liquids or wet materials (such as wet carpet shampoo)
smouldering ashes, cigarette butts, matches etc.
ammable or ignitable materials
very ne dust (e.g. cement dust), ash or toner
hard, pointy objects such as bigger glass shards
1. Make sure that the respective accessory is properly mounted on the device (see
chapterAssembly”).
2. Pull the mains cord only as far out of the housing as you need, ideally up to the yel-
low mark, but no further than up to the red mark on the cord!
3. Insert the mains plug in a properly installed socket that is easily accessible.
4. Press the On/Off switch
to turn the vacuum cleaner on.
5. Move the nozzle over the surface you want to clean. You can pull the vacuum cleaner
like a sled when vacuum cleaning.
Am An auxiliary air valve is located on the handle.
Slide the cover to open it, thereby reducing the
suction power if you want to vacuum off cushions,
carpets or light-weight, moveable objects or
materials. Normally, the auxiliary air valve is closed
so as not to unnecessarily reduce the suction power.
6. After vacuum cleaning, press the On/Off switch
again to turn off the vacuum
cleaner.
7. Pull the mains plug out of the socket, rmly hold the mains cord and push the button
for the cord winder down with your foot. By holding the mains cord, you prevent
the cord from “lashing” against your legs for example.
8. If you used the oor nozzle, hook it into the bracket on the back of the device.
9. To ensure optimum performance of the device, empty the dust bin each time after
using the device and clean the dust lter and exhaust lter regularly (see chapter
“Cleaning the device”).
09242_de-gb-fr-nl_V0.indb 2409242_de-gb-fr-nl_V0.indb 24 06.06.2014 12:33:2106.06.2014 12:33:21
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 09242 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 09242 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info