646283
16
Zoom out
Zoom in
Previous page
1/44
Next page
16
Connecting the vacuum cleaner properly
Only connect the device to a properly installed socket with protective earth contacts.
The socket must also be readily accessible after the device has been connected.
The mains voltage must correspond to the technical data of the device (see section
Technical data”).Only use proper extension cords, whose technical data corres-
ponds to that of the device.
Ensure that the connected mains cord does not pose a tripping hazard. Do not allow
the cord to hang over the edge of a table or kitchen worktop. Someone could catch
him/herself and pull down the device.
Lay the connector cable such that it is not crushed or kinked and such that it does
not come into contact with hot surfaces!
Proper use
Only use the device in enclosed areas. Do not use it outdoors or in rooms with high
humidity.
Check the device for damages prior to each use. If the device, cord or plug exhibit
visible damages, the device may not be used. Do not attempt to replace parts or
repair the product yourself. In the event of damage, contact customer service.
Do not use the device if it malfunctions, has vacuumed up liquids or objects or has
fallen down. Have the device inspected by a professional or contact customer ser-
vice.
Only use the device if it has been completely and correctly assembled! The dust bin
and lter must be in place. The dust bin must be shut in order for it to be inserted
properly.
Do not immerse the device in water or other liquids in order to avoid electrical shocks.
Never touch the device, the cord or the plug with wet hands.
Do not subject the device to extreme temperatures, severe changes in temperatu-
res, open ames, direct sunlight, moisture or liquids.
Do not allow the device to fall and do not subject it to strong percussions.
Never place heavy objects on the device.
Do not vacuum up any liquids and do not ll the dust bin with liquids.
Do not insert anything in the device’s openings/nozzles and ensure that they are not
plugged.
Never leave the device running when unattended.
Immediately turn the device off by pulling the mains plug out of the socket
if you stop using the device for a short period of time,
if you are nished using the device,
before you change the nozzles,
if an error or fault occurs during operation,
if liquids or foreign debris have penetrated the device,
before a storm,
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 08749 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 08749 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info