646284
31
Zoom out
Zoom in
Previous page
1/68
Next page
31 EN
Cleaning the HEPA Filter
The HEPA lter is located in the lter unit in the dust container and should be cleaned
regularly to ensure that the suction power of your vacuum cleaner does not diminish and
the motor is not overloaded.
1. Hold down the release button on the handle of the dust
container and detach the dust container from the vacuum
cleaner.
2. Open the dust container by releasing the fastener clip (A)
and folding up the dust container lid.
3. Remove the HEPA lter (B) by pulling it out.
4. Below the HEPA lter there is another foam lter. Remove
it for cleaning.
5. Tap the HEPA dust lter out over an open dustbin. Clean
the lter using a brush if necessary. Never clean the
HEPA lter with water to prevent damage to the lter!
6. Tap the foam lter out over an open dustbin. If necessary,
you can rinse the foam lter with clear, cold water. Then
allow the lter to dry completely before you insert it again.
7. Place the dry foam lter back into the lter unit.
8. Insert the HEPA lter back into the lter unit.
9. Close the dust container lid. The fastener clip must be heard to lock in place.
10. Insert the dust container back into the vacuum cleaner.
The dust container must be heard to engage in place.
A
B
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 07504 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 07504 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info