Manual Cleanmaxx Z 06456 - HS101U (page 25 of 52) (English, German, Dutch, French)

646307

Zoom out

Zoom in

1/52

25 EN

After Use / Cleaning the Device

CAUTION!

• Empty and clean the water reservoir each time after you use the device to prevent

deposits in the reservoir and thus damage to the device!

• The water reservoir cannot be opened while it is pressurised. Pull out the mains

plug and keep pressing the

steam trigger until no more steam emerges from the

device. The reservoir cap can then be screwed off.

• Always pull the mains plug out of the plug socket when you are not using the device,

before you open the water reservoir or remove an attachment.

• The attachment and the water in the reservoir may still be hot shortly after use. You

should therefore wait until they have completely cooled down before you remove the

attachment or empty the water reservoir.

• Never immerse the device in water or other liquids!

• Never touch the device, the cable or the plug with wet hands.

• To extend the useful service life of the steam cleaner, it should be regularly descaled

with a standard commercial descaling agent. Note the manufacturer's instructions on

the packaging of the descaling agent.

• Do not use any caustic or abrasive cleaning agents or cleaning pads to clean the

device. These can damage the surface.

• Empty the water reservoir: Unscrew the reservoir cap and remove it. Hold the device

over a sink or similar outlet and allow all of the water to run out of the reservoir.

• Wash the cleaning cloth and ﬂ oor cloth after every use in accordance with the washing

instructions.

• Clean the attachments if necessary with clear, warm water.

• If necessary, wipe down the outside of the device with a soft, slightly damp cloth and

dry it with a soft cloth.

• Allow all device and accessory parts to dry completely before you store them in a

clean and dry place that is inaccessible to children.

Troubleshooting

If the device should stop working properly, ﬁ rst check whether you are able to correct the

problem yourself.

Do not attempt to repair a defective electrical device yourself!

Problem Possible cause/solution

Water emerges from

the attachment.

• The device has not yet reached operating temperature.

Wait until the control lamp has gone out.

• Water may emerge from the attachment when you ﬁ rst

start using it. This is normal and does not constitute a

defect with the device.

06456_de-en-fr-nl_V1.indb 2506456_de-en-fr-nl_V1.indb 25 03.07.2015 10:28:0403.07.2015 10:28:04

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 06456 - HS101U in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cleanmaxx Z 06456 - HS101U Manual

Product: