646295
23
Zoom out
Zoom in
Previous page
1/60
Next page
23
Attaching/removing the nozzles
If you would like to use one of the other enclosed nozzles, it must rst be attached to the nozzle
adapter (F):
An arrow is embossed on the end piece of the nozzle and the
nozzle adapter. Connect the two parts so that the arrows are
pointing towards one another and then turn the nozzle to the
stop.
To remove the nozzle, turn it back until the arrows on the nozzle
and adapter are pointing towards one another and pull it out.
The nozzle adapter will be attached to the main unit in the exact same manner as the cleaning
head : Insert the nozzle adapter in the steam nozzle (9) of the main unit until the catch au-
dibly locks into place.
To remove the nozzle adapter, depress the catch and pull the adapter out at the same time.
Attaching the oor pad and carpet cleaning head
• The oor pad (K) is attached to the cleaning head with Velcro
straps. Place it on the cleaning head and push it rmly. After use,
simply pull it off of the cleaning head.
To clean carpets, place the carpet cleaning head (M) at on the
oor and place the cleaning head with the oor pad in the carpet
cleaning head. Press cleaning head rmly into the carpet cleaning
head until it locks into place.
Filling the water tank
ATTENTION!
Always turn off the appliance before you ll the water tank.
Never ll the appliance with cleaners or other additives. They may irreparably damage the
appliance and as such, the safe operation of the appliance can no longer be assured.
If the power LEDs (12) are blinking red, the water tank (7) is empty and has to be lled.
We recommend that, ideally, you ll the water tank with distilled water to prevent
calci cation, especially if the hardness of your tap water is very high.
5. Take the water tank out of the appliance to ll it. To do so, depress both side release but-
tons (6).
6. Open the water tank: Turn the water tank lid (5) a bit in a counterclockwise direction and
remove it.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 04997 - VSC28A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 04997 - VSC28A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info