Manual Cleanmaxx Z 04960 - HS101 (page 24 of 52) (English, German, Dutch, French)

562303

Zoom out

Zoom in

1/52

• Water may emerge from the attachment when you ﬁ rst start using it. This is nor-

mal and does not constitute a defect with the device.

• As the pipe in the device has to reﬁ ll with steam each time you use it, you may

need to press the steam release button several times when you start using it be-

fore steam starts emerging.

• How much steam is emitted depends mainly on the speed and frequency with

which the steam release button is pressed. The faster you press the release but-

ton, the more steam is emitted. However, this is at the expense of the tempera-

ture. You should therefore only press the steam release button every 1-2 seconds

to ensure that the steam is hot enough.

• If you want to steam-press clothing, use the wide nozzle with the cleaning cloth and

hang the clothing on a coat hanger beforehand.

1. If you have not already done so, ﬁ t the attachment of your choice (see the "Putting Into Op-

eration" chapter, "Attaching/Removing Attachments" section) and pour water into the water

reservoir (see the "Putting Into Operation" chapter, "Adding/Removing Water" section).

2. Insert the mains plug into a properly installed mains socket. The control lamp starts to light

up and the device starts to heat up.

3. The control lamp goes out after a few minutes. The device is now ready for use.

4. Move the attachment over the surface which is to be cleaned and press the steam release

button to release steam.

5. If you want to top up the water during use, pull out the mains plug and allow the device to

cool down completely.

6. Then pour water into the water reservoir (see the "Putting Into Operation" chapter, "Add-

ing/Removing Water" section).

7. Remove the plug from the mains socket after use and allow the device to cool down com-

pletely. Unscrew the water reservoir cap a little so that the pressure can escape. Only fully

unscrew the water reservoir cap once the pressure has been released and empty the water

reservoir (see the "Putting Into Operation" chapter, "Adding/Removing Water" section).

8. Clean the device if necessary and store it in a dry, clean place that is not accessible to chil-

dren (see the "Cleaning and Storage" chapter).

Cleaning and Storage

CAUTION!

❐ Remove the mains plug from the socket before cleaning the device.

❐ Shortly after use, the device may still be very hot. You should therefore wait a few minutes

until it has completely cooled down before you remove the attachment used, empty the

water reservoir and/or store the device away.

❐ Never immerse the device in water or other liquids!

❐ Never touch the device, the cable or the plug with wet hands.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 04960 - HS101 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cleanmaxx Z 04960 - HS101 Manual

Product: