562291
19
Zoom out
Zoom in
Previous page
1/44
Next page
19
Sensitive articles of clothing should be ironed inside out.
Ironing trousers is easier if they are hung up by the legs.
For best results, the textile brush adapter should be gently applied to the fabric to
be ironed.
Although the device can even be used for sensitive fabrics such as silk or wool, you
should read the care instructions of any textile before ironing it with the device.
Some fabrics such as leather, suede and velvet may not be ironed!
1. If you have not already done so, mount the adapter of your choice (see chapter “Start-up”,
section “Mounting / removing the adapters”) and add water to the water tank (see chapter
“Start-up”, section “Adding / removing water”).
2. Connect the plug to a properly installed socket. The red power light illuminates and the
device begins to heat up.
3. After approximately 90 seconds, the device is ready for use.
With the textile brush adapter: Move the device over the fabric in a horizontal or vertical
direction and depress the steam trigger at regular intervals in order to evenly steam the
textile.
With the crease adapter: Fold open the crease adapter by pulling the hook on the adapter
up (towards the handle). Place the textile between the heating plate and adapter and
release the hook. Hold the textile with one hand and slide the device evenly along the
crease. In this process, depress the steam trigger regularly. Depending on the desired fold
thickness, you can apply steam to one area of the fabric several times.
4. If the device is used for a prolonged period of time, it will have to reheat from time to time
in order to maintain a constant temperature. When this happens, the red power light will
turn back on. This is a normal electrical process and not an error. Make sure that you do not
depress the steam trigger during the heating process to avoid unnecessarily prolonging it and
to avoid scalding hazard, caused by emitting hot steam or hot water.
5. If you want to add water during use, pull the plug out of the socket and proceed as described
in chapter “Start-up”, section “Adding / removing water”.
6. After use, pull the plug out of the socket and drain any leftover water from the water tank
(see chapter “Start-up”, section “Adding / removing water”).
7. Let the device cool off completely, clean the device, when needed, and store it in a dry, clean
place that is not accessible to children and animals (see chapter “Cleaning and storage”).
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 03397 - DF-A007 Premium at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 03397 - DF-A007 Premium in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info