575213
17
Zoom out
Zoom in
Previous page
1/48
Next page
17
Risk of electric shock and re
Only connect the device to a properly installed socket with protective earth contacts.
The socket must also be easily accessible after connecting so that the mains connec-
tion can be quickly disconnected. The mains voltage must correspond to the techni-
cal data of the device. Keep in mind that the voltages of power supplies differ from
country to country. Check whether the local power supply corresponds to the device’s
technical data. Only use proper extension cords and plug adapters, whose technical
data correspond to those of the device.
Never submerge the device in water or other liquids! Make sure that the device, the
cable or the plug are not at risk of falling in water or of getting wet. If the device falls
in water, immediately disconnect the power supply.
Never touch the device, the cable or the plug with wet hands.
The steam must not be directed towards mains cords or parts containing electrical
components (e.g. oven interiors, fridges, switches and lights, microwave ovens).
Turn the device off and pull the mains plug out of the socket
if you are not using the device,
if a fault occurs during operation,
before a storm,
before you clean and/or stow the device.
If you wish to remove the mains plug from the socket, never pull on the mains cord,
but always on the plug.
Only use the device in enclosed areas.
Do not use the device in rooms containing easily ammable dust or toxic and explo-
sive vapours.
Do not operate the device in very moist environment or in the vicinity of ammable
material.
Immediately after ironing, set down the device, which is still hot, at a minimum dis-
tance of 15 cm from walls, furniture and other objects.
Check the device for damages prior to each use. If the device, the cord or the plug
exhibit visible damages, the device may not be used. Do not use the device if it mal-
functions, has fallen down or in water.
In case of damages/malfunctions, immediately turn the device off and pull the mains
plug out of the socket.
Never attempt to repair an electrical device or replace parts yourself. In the event of
defects, the device may no longer be used. Contact the nearest customer service
centre/quali ed professional or, in the event of damage, contact customer service.
Avoiding damage to materials, property and the device
Lay the cable such that it is not crushed or creased and such that it does not come
into contact with hot surfaces. Especially the power line and steam pipe from the
station to the iron must not be creased.
Only iron on a stable, level, heat and moisture resistant base. We recommend to use
a commercially-available ironing board.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 02017 - CEA-YC698 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 02017 - CEA-YC698 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info