703909

Cleanmaxx YPF-6517P - Z06296 Manual

23
Zoom out
Zoom in
Previous page
1/48
Next page
23 EN
5. Empty the water reservoir (13): Open the water reservoir cap (3), hold the iron over
a sink or similar outlet and turn it upside down. Allow all of the water to run out of the
water reservoir (12).
6. Connect the iron to the mains power again, move the steam switch (5) to position
(Steam on) and the temperature control (12) to the maximum setting for one to two
minutes so that the rest of the water evaporates. Repeat steps 1 to 4.
7. If necessary, wipe down the iron with a soft, slightly damp cloth and then dry it with
a soft cloth.
8. Once the bottom of the iron (1) has cooled down completely and the water reser-
voir (13) is empty, wind up the mains cable.
9. Store the iron in a dry, clean, frost-free place that is not accessible to children and
animals.
Troubleshooting
If the device does not work properly, fi rst check whether you are able to rectify the prob-
lem yourself using the following list.
Do not attempt to repair a defective electrical device yourself!
Problem Possible cause / solution
The device does not
work. The operating
lamp (10) does not
light up / fl ash.
• Is the mains plug inserted as far as it will go in the plug
socket?
• Is the plug socket defective? Try another plug socket and
check the fuse of the mains connection.
No steam is pro-
duced.
• Is the water reservoir (13) empty? Top up the water res-
ervoir.
• The device has not yet reached the operating temperature.
Wait until the heat control lamp (11) goes out.
• Is the temperature control (12) on a temperature setting
that is too low? The higher the temperature setting, the bet-
ter the steam production.
• Is the steam switch (5) in position
(Steam off)? Move it
to position
(Steam on).
• Press the steam burst button (6) 2 to 3 times to start the
production of steam.
• At high temperatures the steam produced is dry and almost
invisible. This is exacerbated by a high ambient tempera-
ture. Reduce the temperature to check whether the device
is producing steam.
Water emerges from
the bottom of the
iron (1).
• Is the water reservoir (13) overfi lled? Pour away a little wa-
ter (see the “After Use / Cleaning and Storage” chapter).
• Is the temperature control (12) on a low temperature set-
ting? Select a higher temperature setting so that steam can
be generated.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx YPF-6517P - Z06296 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx YPF-6517P - Z06296 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info