Manual Cleanmaxx YF-418-12 - Z00483 (page 17 of 40) (English, German, Dutch, French)

703411

Zoom out

Zoom in

1/40

17 EN

Filling the Water Reservoir

NOTE!

■ After use, the device may still be hot. Wait until the water reservoir has cooled com-

pletely before ﬁ lling / emptying it.

■ Pour no more than 250 ml (note the max marking) of water into the water reservoir.

The device can be operated with both tap water and distilled water. However, if

you use tap water, the device will need to be regularly descaled (see the "Clean-

ing and Storage" chapter, "Descaling" section). If you use distilled water, there is

no need to descale the device.

1. Fill the measuring cup up to the MAX marking with water.

2. Pull the water reservoir cap (4) out of the water reservoir (5) Please note that it can-

not be completely detached from the device.

3. Pour the water from the measuring cup into the water reservoir. Here too you should

only pour up to the max marking.

4. Close the water reservoir cap again. Make sure that the water reservoir is properly

closed.

Use

NOTE!

■ Never use the device without water to prevent damage to the device!

■ There must be plenty of space around the item of clothing which is to be smoothed.

You may only perform vertical smoothing if the item of clothing is hanging on a hang-

er and cannot come into contact with other garments, objects, people or animals.

■ CAUTION – Danger of scalding! Only use the device once the control lamp has

gone out. Operating temperature has then been reached. If the device is used be-

fore the control lamp has gone out, hot water may escape.

■ Before using the device, read the care instructions for the fabric which is to be

smoothed. Some fabrics, leather and suede as well as fabrics with ﬂ ounces,

sequins and appliqués must not be steamed!

1. Mount the attachment you want (see the “Mounting / Removing Attachments” chapter).

2. Pour water into the water reservoir (5) (see the “Filling the Water Reservoir” chapter).

3. Insert the mains plug into a properly installed plug socket that is easily accessible.

The control lamp (1) lights up and the device starts to heat up. When the control lamp

goes out, the device is ready for use.

4. Move the device without attachment in strokes over the fab-

ric and press the steam release button (2) at regular intervals

as you do so. However, do not keep the steam release

button held down constantly! It is important for the steam

bottom (8) to touch the fabric so that it is freshened up.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx YF-418-12 - Z00483 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cleanmaxx YF-418-12 - Z00483 Manual

Product: