703913

Cleanmaxx VL-621E-A - Z09109 Manual

20
Zoom out
Zoom in
Previous page
1/48
Next page
EN 20
Attaching / Removing Nozzles
• Plug the free end of the telescopic tube as far as it will go into one of the nozzles
supplied. Twist the nozzle back and forth slightly as you do this.
• For greater fl exibility, the nozzles can also be plugged directly onto the handle of the
suction hose, without the telescopic tube.
• To detach a nozzle, pull it off.
Operation
PLEASE NOTE!
■ Only switch on the vacuum cleaner once all parts have been completely mounted and
all fi lters have been inserted correctly.
■ Note the MAX marking on the dust container. If during use the marking is reached,
empty the dust container. The fi lters must also be regularly cleaned in order to pre-
vent overloading of the motor.
■ To ensure that the mains cable does not become hot during operation, pull out at
least two thirds of the total length from the device before the vacuum cleaner is
switched on. Do not pull out the mains cable with force up to its maximum length (not
further than the red marking on the mains cable) in order to prevent damage!
1. Attach the nozzle you want to the telescopic tube or suction hose (see the “Assembly”
chapter – “Attaching / Removing Nozzles”).
2. Pull the mains connecting cable out of the housing, ideally up to the yellow marking,
but not further than the red marking on the mains connecting cable!
3. Insert the mains plug into a properly installed plug socket that is easily accessible.
4. Press the
On / Off switch to switch on the vacuum cleaner.
5. The suction force can be reduced or increased by turning the
On / Off switch to-
wards MIN or MAX.
6. Guide the nozzle over the surface to be cleaned. The vacuum cleaner can be pulled
along like a sledge during cleaning.
Tip: The handle is equipped with an exhaust air valve. Open
the exhaust air valve (by sliding the cover) to further reduce
the suction force when cleaning upholstery, rugs or light,
movable objects.
Normally the exhaust air valve should be closed to prevent
the unnecessary reduction of the suction force.
7. After vacuuming, press the
On / Off switch to switch off the device.
8. Pull the mains plug out of the plug socket, hold the mains connecting cable securely
and press the
button for winding up the cable with your foot. Holding the mains
connecting cable prevents any "whiplash" effect of the cable, e.g. against your legs.
9. To ensure optimum performance of the device, empty the dust container after every
use.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx VL-621E-A - Z09109 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx VL-621E-A - Z09109 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info