703904

Cleanmaxx SWS-288 - Z02979 Manual

16
Zoom out
Zoom in
Previous page
1/40
Next page
EN 16
• Detaching: Pull the tab on the top of the attachment forwards and remove the at-
tachment (Picture A).
Filling the Water Tank
PLEASE NOTE!
■ Never pour any descaling or cleaning agent or other chemical additives into the water
tank. This may destroy the device and safe working is no longer guaranteed.
■ Pour no more than 350 ml of water into the water tank.
• Water residues in the water tank are attributable to the fact that this device
has been tested and do not constitute a defect.
• The device can be operated with tap water or distilled water. However, if you
use tap water, the device will need to be regularly descaled (see the “Clean-
ing and Storage” chapter – “Descaling”).
1. Fill the measuring cup (A) up to the MAX marking with water.
2. Pull the water tank cap (in the bottom) out of the water tank (C). Please note that it
cannot be completely detached.
3. Carefully pour the water from the measuring cup into the water tank (note the MAX
marking).
4. Place the water tank cap back into the opening. Make sure that the water tank is
fi rmly sealed shut.
Use
PLEASE NOTE!
■ CAUTION – Danger of Scalding! The water tank cap must not be opened during use.
■ The device must be placed down on a stable,
water-resistant and heat-resistant
sur-
face.
Do not turn the hot device upside down or place it on its side. Hot water could
run out.
■ Only use the device in places where heat and moisture cannot cause any damage.
Never use in front of surfaces made from glass or plastic.
■ Before using the device, read the care instructions for the fabric which is to be
smoothed. Some fabrics, leather and suede as well as fabrics with fl ounces,
sequins and appliqués must not be steamed!
■ Always test the device fi rst on a small, inconspicuous spot on the clothing.
■ Do not iron over zips, studs, clips etc. to prevent any scratching of the steam bottom.
■ Never use the device without water to prevent damage to the device!
1. Hang up the hanger containing the item of clothing in such a way that there is plenty
of space around the item of clothing which is to be smoothed. It must not come into
contact with other items of clothing, objects, people or animals.
2. Attach the attachment you want (see the “Attaching / Detaching Attachments” chapter).
3. Pour water into the water tank (C) (see the “Filling the Water Tank” chapter).
02979_inlay_DE-EN-FR-NL_A5_V1.indb 1602979_inlay_DE-EN-FR-NL_A5_V1.indb 16 19.11.2019 12:02:4219.11.2019 12:02:42
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx SWS-288 - Z02979 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx SWS-288 - Z02979 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info