703418
18
Zoom out
Zoom in
Previous page
1/40
Next page
EN 18
Cleaning the Dust Container and HEPA Filter
1. Press onto the dust container (4) to unlock it.
2. Reach into the recess in the dust container and pull it up and out of the motor unit (3).
3. Reach into the opening and pull the HEPA- lter out of the dust container.
4. Empty the dust container.
5. Wipe out the dust container with a dry duster if necessary.
6. Tap out the HEPA- lter and clean it with a soft brush if necessary. Please note: For
thorough cleaning the lter can be rinsed under cold (!) running water.
NOTICE: Allow the HEPA- lter to dry completely before the device is reassembled.
7. Insert the HEPA- lter into the dust container.
8. Insert the dust container into the motor unit. It must audibly click into place.
Cleaning the UV-C Lamp
PLEASE NOTE!
CAUTION – Danger of Burns! The UV-C lamp will become hot during use. Allow the
UV-C lamp to cool suf ciently after using the device.
1. Undo the two screws on the cover (8) of the UV-C lamp (11) and take off the cover.
2. Wipe down the UV-C lamp with a dry duster. NOTE: Make sure that you do not touch
the UV-C lamp with your ngers!
3. Place the cover back on and x it in place with the two screws.
Troubleshooting
If the device does not work properly, rst check whether you are able to rectify the prob-
lem yourself. If the problem cannot be solved with the steps that are listed, contact the
customer service department.
Do not attempt to repair a electrical device yourself!
Problem Possible cause / solution / tips
The device
generates no
suction.
Is the mains plug inserted in the socket correctly? Correct the
t of the mains plug.
Is the plug socket defective? Try another socket.
Check the fuse of the mains connection.
Is the device switched on? Press the On / Off switch (1).
Low suction
force.
Is the dust container (4) too full? Empty the dust container.
• Is the lter heavily clogged up? Clean the lter.
Is the suction opening (7) blocked? Switch off the device, pull
the mains plug out of the plug socket and remove the blockage.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx SV1801A - Z03406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx SV1801A - Z03406 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info