703394
19
Zoom out
Zoom in
Previous page
1/44
Next page
19 EN
The lter should be replaced every 12 18 months; the UV-C lamp (12)
should be replaced every 12 – 24 months. If you have any questions about
spare parts, please contact the customer service department via our web-
site: www.dspro.de/kundenservice
Use
PLEASE NOTE!
The device should only be used if it has been completely and correctly assembled!
The dust container and the lter must be inserted and must not be damaged. If
the dirt were to get inside the motor unit, this could damage the motor.
Make sure that the safety switches of the UV-C lamp are not blocked!
Switch the device off after each surface has been cleaned as this will considerably
increase the operating time on each battery charge. Charge up the battery after use
(see the “Charging Up the Battery” chapter).
1. Place the device down fl at on the surface which is to be cleaned.
2. Press the On / Off switch (2) to switch on the device. The device starts to vacuum and
the UV-C lamp (12) and the vibration head (11) switches on.
The vibration shakes up the surface which is to be cleaned and the dust which
is agitated is sucked in through the suction opening (8).
3. Guide the device very slowly and evenly over the surface to be cleaned.
4. After vacuuming, press the On / Off switch to switch off the device.
Cleaning and Storage
PLEASE NOTE!
Empty the dust container each time after you use the device. The lter must also be
regularly cleaned in order to prevent overloading of the motor.
Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the de-
vice. These can damage the surface.
As required, wipe down the motor unit (4) with a damp soft cloth. Then dry it with a
soft cloth.
Wipe out the recess for the dust container (5) with a duster.
Store the device in a dry, cool place that is not accessible to children and animals.
Cleaning the Dust Container and HEPA Filter
1. Press onto the dust container (5) to unlock it.
2. Reach into the recess in the dust container and pull it up and out of the motor unit (3).
3. Reach into the opening and pull the HEPA-fi lter out of the dust container.
4. Empty the dust container.
5. Wipe out the dust container with a dry duster if necessary.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx SV1801 - Z03416 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx SV1801 - Z03416 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info