703679
22
Zoom out
Zoom in
Previous page
1/52
Next page
EN 22
2. Insert the battery into the charging station. The three con-
tacts of the battery must rest on the three contacts (a) of
the charging station.
3. First plug the barrel connector on the cable of the mains
adapter (13) into the socket (c) of the charging station and
then connect the mains adapter to the plug socket.
4. The green operating lamp (b) and the red charge control
lamp (d) will light up. The battery is being charged.
5. When only the green operating lamp is still lit, the battery
is fully charged.
6. First disconnect the mains adapter from the mains power and then disconnect the
barrel connector from the charging station.
7. Remove the battery from the charging station.
Assembly
Attaching / Removing Nozzles
With the exception of the electrical oor nozzle (9), all nozzles are attached with the aid
of the nozzle adapter (12).
Plug the nozzle adapter into the suction opening (8) or the extension tube. Plug the
nozzle you want onto the nozzle adapter.
To take them apart, pull the nozzle and the adapter apart.
Attaching / Removing the Floor Nozzle and Extension Tube
No adapter is required for the electrical oor nozzle (9) and the extension tube.
They are plugged directly onto the suction opening (8). The catches must be heard
to engage in place. Attach the electrical oor nozzle to the extension tube in the
same way.
To detach it, press the release button and pull the electrical
oor nozzle or the extension tube out at the same time.
Removing / Inserting the Dust Container
Removing: Twist the dust container (7) a little bit. It is re-
leased from the main unit (3) and can be removed.
Inserting: Insert the dust container into the main unit. Ro-
tate it slightly as you do this until it engages in the main unit
correctly. Then twist the dust container in the main unit to
secure it in place. The release button of the dust container
must be located below the suction opening (8) after it has
been attached.
a
b
c
d
open
closed
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx PC-P008E - Z07833 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx PC-P008E - Z07833 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info