703862
18
Zoom out
Zoom in
Previous page
1/40
Next page
EN 18
Assembly
Plug the handle (9) into the main unit (6). It must click audibly into place.
• If the extension rod (2) is to be used, plug it into the main unit (6) and then plug the
handle (9) onto the extension rod (2). Both parts must be heard to engage in one
another.
To remove the extension rod (2) or the handle (9), press the release button on the
handle (8) and pull it off. In addition, press the release button on the extension rod (7)
and pull it out of the main unit (6).
Attaching / Removing Attachments
Plug the attachment you want onto the main unit (6) so that the markings on the at-
tachment and main unit point towards each other. The attachment must be heard to
engage in place.
To remove the attachment, simply pull it off the main unit (6).
Use
CAUTION!
Keep animals, hair, jewellery, wide clothing away from rotating parts of the device. If
something does become caught in the device, switch it off immediately.
The device should only be used if it has been completely and correctly assembled!
Always switch off the device rst before attaching or removing attachments!
Do not use the device when it is connected to the mains adapter.
Switch the device off after each surface has been cleaned as this will considera-
bly increase the operating time on each battery charge.
1. Plug on the attachment you want (see the “Assembly” chapter).
2. Press the On / Off switch on the handle (9) to switch on the device.
3. Guide the attachment over the surface which is to be cleaned or polished.
4. To switch off the device, press the On / Off switch on the handle (9) again.
5. Clean the used attachment after use (see the “Cleaning and Storage” chapter).
Cleaning and Storage
CAUTION!
Make sure that the device is switched off before cleaning it!
Never immerse the device, the mains adapter or the mains cable in water or other
liquids.
During cleaning make sure that no liquid gets into the main unit, the handle or the
extension rod. Only the attachments may be cleaned with water.
Only reassemble the device once all of the parts are completely dry.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx PC-P001 - Z05991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx PC-P001 - Z05991 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info