703905

Cleanmaxx CBL-CV1703 - Z02485 Manual

19
Zoom out
Zoom in
Previous page
1/40
Next page
19 EN
Cleaning the HEPA Filter
1. Twist the fi lter compartment cover (2) anticlockwise and take it off.
2. Remove the HEPA fi lter from the fi lter compartment.
3. Tap out the HEPA fi lter and clean it with a soft brush if necessary. IMPORTANT: Do
not wet-clean the HEPA fi lter!
4. Clean the cover and the fi lter compartment with a brush if necessary or wipe with a
damp cloth.
5. Insert the HEPA fi lter back into the fi lter compartment, put on the cover and twist
clockwise to secure.
Cleaning the Main Unit and Accessories
• Wipe down the main unit (5), the extension tubes (8), the combi nozzle (9) and the
fl oor nozzle (10) with a damp, soft cloth if necessary. Then dry with a soft cloth.
• Regularly remove hair and fl uff from the nozzles and brushes.
Storage
• Store the device and all accessories in a cool, dry place which is protected from direct
sunlight and is out of the reach of children and animals.
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the cus-
tomer service department.
Do not attempt to repair an electrical device yourself!
Problem Possible cause / solution
The device generates no
suction.
• Is the mains plug not inserted in the plug socket
correctly? Correct the fi t of the mains plug.
• Is the plug socket defective? Try another plug sock-
et.
• Has the fuse in the electrical distributor (fuse box)
been triggered? Reduce the number of devices in
the circuit.
Low suction force.
• Is the dust container (6) full? Empty the dust container.
• Is the HEPA fi lter heavily clogged up? Clean it in
accordance with the "Cleaning and Storage" chapter.
• Is the suction opening (1) blocked? Switch off the
device and remove the blockage.
• Is the nozzle or the extension tube clogged? Switch off
the device and remove the blockage.
• It is also possible that some smaller items will remain
stuck to the carpet or will be too big/heavy to be
picked up by the device. Remove these foreign
objects by hand.
… 19 …


Need help? Post your question in this forum.

Forumrules
1

Forum

cleanmaxx-cbl-cv1703---z02485

Reset search

  • Is it normal that the out coming air is hot when in use over carpet . No noticed problem with the motor. Submitted on 20-12-2021 at 12:54

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx CBL-CV1703 - Z02485 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx CBL-CV1703 - Z02485 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info