703681
22
Zoom out
Zoom in
Previous page
1/48
Next page
EN 22
3. Remove the lid with the cyclone insert (B) from the dust
container.
4. Lift the tab on the lid, open the lid and remove the lter
holder (C) and remove the foam lter.
Please note: The second motor lter is attached to the
lter holder and cannot be removed from the holder!
5. Tap out all the parts over a bin and brush away any loose
dirt.
6. You can clean the cyclone insert and dust container with a damp cloth.
7. After drying, place the foam lter back into the lter holder and replace the holder
onto the cyclone insert. Close the lid so that it audibly locks into place.
Attention: Never put damp parts back into the dust container!
8. When all parts are dry, replace the cyclone insert in the dust container.
9. Put the lid on the dust container so that the arrow symbol on the dust container
points to the
symbol on the lid. Close the lid by turning it as far as it will go. The
arrow symbol should now be pointing to the
symbol.
10. Put the dust container in the device. Make sure that it audibly locks into place.
Cleaning the HEPA exhaust air lter
The HEPA exhaust air lter is situated behind the protective grill on the back of the
vacuum cleaner.
1. Pull down the exhaust hatch latch with lter (D) and
remove the hatch simultaneously.
2. Tap it out over a garbage bin. If necessary, clean it with
a soft brush.
Attention: Do not clean the HEPA exhaust air lter
with water!
3. Brush or wipe the lter compartment if required.
4. Place the exhaust hatch with lter in the device and close
the hatch. The hatch must audibly lock into place.
Cleaning the housing and nozzles
If needed, clean the housing with a damp, soft cloth.
Regularly remove hair and lint from the nozzles.
Storage
For storage you hook the oor nozzle into the holder on
the back of the device (see gure) and close down the
telescopic tube as far as it will go.
Store the vacuum cleaner in a cool dry indoor room where
it cannot be reached by children or animals.
C
B
D
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx C-320-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx C-320-70 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info