817551

Clean Air Optima CA-904C Manual

9
Zoom out
Zoom in
Previous page
1/104
Next page
9
3. In operating condition, press the key to shift PTC from low heating power to high heating
power. By pressing the key again, the PTC will switch back to low heating power.
a) If working at low heating power: the low heating power icon lights up (the high heating
power icon is o).
b) If working at high heating power: the high heating power icon lights up. (high heating
starts after 10 seconds).
4. In operating condition, press the key to shift from low fan power to high fan power.
By pressing the key again, the fan switches back to low power.
a) When working at low fan speed: the low fan power icon lights up.
b) When working at high fan speed: the high fan power icon lights up.
5. In operating mode, you can press the key to make the device oscillate or not.
a) Press the Swing key: the device will oscillate, the icon lights up.
b) Press the Swing key again: the device will stop oscillating, the icon will be o.
Note:
In warm airflow mode the PTC stops working when the room temperature is higher than
the set temperature. The fan stops working after 10 seconds. During that time, the swing
function is not available.
6. In operating condition, press the key to set the timer.
a) Go to the timer setting mode, press the key, the LED time icon lights up and blinks
every 0.5 seconds. During this time-frame, press the or the key to set the timer
(0-12 hours), with each key press the time will be added by 1 hour.
By pressing and holding the or keys, the time can be set faster.
b) If no keys are pressed within 5 seconds (except for and ), the LED indicator will
show the room temperature.
c) Press the timer key to see the set time. If the value shows a number except for -0-, the
timer will start timing (not shown), if the timer reaches value -0-, then the device will
turn o at once.
d) If the value shows -0- in timer setting, then this means no time is set, the time icon will
be o, the LED display will show the current room temperature.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clean Air Optima CA-904C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clean Air Optima CA-904C in the language / languages: All languages as an attachment in your email.

The manual is 1.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info