Manual Clatronic VL 1131 CB (page 21 of 38) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

497174

Zoom out

Zoom in

1/38

ENGLISH

Assembly instructions

The device must be completely assembled before use! While

reading the text it is advisable to refer to the „Overview of the

Components“.

1. Place the stand tube (7) in the base (9). It must be heard to

click into place. Attach it on the bottom with the crosshead

screw (Not shown).

2. Unscrew the mounting ring (12) in an anticlockwise direc-

tion. Keep it ready to hand.

3. Position the rear protection grid (10) in place in accordance

with the recesses.

 NOTE:

Please ensure that the carrying handle is facing upwards.

4. Turn the attachment ring (12) for the rear protection grid (10)

slightly in a clockwise direction.

5. Attach the propeller. Note the position of the guide pin on the

motor shaft.

6. Tighten the attachment screw (13) for the propeller in an

anticlockwise direction.

7. Remove the preassembled fastening screw (1) and nut (3)

from the wire mesh guard. Keep it ready to hand.

8. Insert the front wire mesh guard (14) into the hook (11) .

 NOTE:

Ensure that the holes for the attachment screw in the front

and rear protective grille are aligned one above the other.

9. Secure the wire mesh guard with the fastening screw (1)

and nut (3).

10. Close the attachment hooks.

Position

The ideal position is a non-slip, ﬂat surface.

Putting into Service

Electrical Connection

1. Before inserting the plug into the socket. Make sure that the

mains voltage to be used matches that of the device. You

can ﬁnd this information on the nameplate.

2. Connect the device to a duly installed protective contact

socket.

Use

Basic Settings

Set the blower inclination angle before starting the device. You

can adjust the inclination angle by tipping the blower casing with

both hands.

CAUTION:

The inclination angle amounts to approx. 15°.

Operation

Use the pushbutton switches on the front to select the speed:

• 3 fast

• 2 medium

• 1 slow

• 0 off

Shift to „0“ to switch off the device.

Fan Setting

For this you have two possibilities:

Fixed

• Turn the device off.

• Pull out the adjustment knob.

• Hold the fan by the protective cage and turn it in the desired

direction.

Oscillating

• Press in the adjustment knob.

• The device swivels automatically within a range of approxi-

mately 45°.

• Pull the adjustment knob in order to switch the function off.

Cleaning

WARNING:

• Always remove the mains plug before cleaning the device.

• If you need to remove the safety guard: Always switch the

device off and remove the mains plug.

• Under no circumstances should you immerse the device

in water for cleaning purposes. Otherwise this might result

in an electric shock or ﬁre.

CAUTION:

• Do not use a wire brush or any abrasive items.

• Do not use any acidic or abrasive detergents.

• Clean the outside of the device with a dry cloth without any

additives.

• If the device is very dirty wet a cloth with water and then

wipe the device dry once you have ﬁnished.

Noise development

The workplace-related emission value is less than 70 dB(A).

05_VL 1131 CB.indd 21 08.11.11 11:17

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic VL 1131 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic VL 1131 CB Manual

Product: