Manual Clatronic vcr d 620 (page 42 of 56) (English, German)

138685

Zoom out

Zoom in

1/56

14 EN

Real Time Tape Counter

• This shows the elapsed recording or playback time in

hours, minutes, and seconds on screen. (Nothing is shown

in the case of blank portion.)

• The “ – ” indication will appear when the tape is rewound

further than the tape counter position “0:00:00”.

Timer Recording

You may programme the DVD/VCR to start and end a

recording while you are away. You can set 8 programmes to

record on specific days, daily or weekly within a 1-year period.

• Use the remote control for this procedure.

• Insert a cassette tape with its erase-prevention tab in place.

(If necessary, rewind or fast forward the tape to the point at

which you want to begin recording.)

1) Press

VCR, then MENU.

2) Press

K or L to select “TIMER”, then press B.

Note: If you have not set the clock yet, “CLOCK” setting

menu appears. If so, follow the steps outlined in the

“Setting the Clock”. Then, set the timer.

•When you press

B after pressing K or L during steps 3) to

9), the input mode will move to the next step.

• If you do not press

B within 5 seconds of setting an item,

the input mode will move to the next step.

•Press

s to go back one step from the current setting during

steps

4) to 9). If s is pressed when the TIMER NUMBER

is flashing, the entire programme contents will be erased.

3) Programme number flashes. Press

K or L repeatedly until

the desired programme number appears. Then, press

For once-only recording : Press K or L repeatedly until

the relevant month appears.

For daily recording : To record a TV programme at the

same time on the same channel from Monday through

Friday. While the month digit is flashing, press

K or L

repeatedly to select “MO-FR”.

For everyday recording : To record a TV programme at

the same time on the same channel everyday. While the

month digit is flashing, press

K or L repeatedly to select

“MO-SU”.

For weekly recording : To record a TV programme at the

same time on the same channel every week. While the

month digit is flashing, press

K or L repeatedly to select

“W-MO” (Example: every monday).

For once-only recording only : Press K or L repeatedly

until your desired day appears.

6) Press

K or L repeatedly until the relevant start hour

appears. Next, enter the minute digit.

7) Press

K or L repeatedly until the relevant end hour

appears. Next, enter the minute digit.

8) Press

K or L repeatedly until the relevant channel number

appears.

9) Press

K or L repeatedly until the desired tape speed

appears.

10)Press

B. Programme 1 is now completed.

•To set another timer programme, repeat steps

3) to 10).

11)Press

MENU to exit.

12)Press

T-SET to activate a timer recording.

The VCR goes into timer-standby mode.

To Stop a Timer Programme Which Has Already

Started

Press STOP/EJECT on the DVD/VCR.

Note: STOP on the remote control will not function in the

Timer Recording mode.

To Correct Timer Programmes

If the unit is already in timer standby mode, press

STOP/EJECT on the unit or T-SET to exit from the standby

mode.

1) Repeat steps

1) to 3) in the “Timer Recording”.

2) Select the setting you want to change using

B or s.

3) Enter the correct numbers using

K or L, then press B.

4) Press

MENU to exit.

5) Press

T-SET to return to timer standby mode.

To Cancel or Check the Start/End Time

If the unit is already in timer standby mode, press

STOP/EJECT on the unit or T-SET to exit from the standby

mode.

1) Repeat steps

1) to 2) in the “Timer Recording”.

2) Select a programme number you want to check using

K or

L. The details of selected programme appears on the TV

screen. You may cancel the entire programme by pressing

3) Press MENU to exit.

Avoid Overlap of TIMER Programmes...

A timer programme does not work while another programme

is under execution.

Hint for Timer Recording

• If either there is a power failure or this unit is unplugged for

more than 30 seconds, clock and all timer settings are lost.

• If a tape is not in this unit or does not have the erase-

prevention tab, the indicator flashes and timer

recording cannot be performed. Please insert a recordable

tape.

• If a tape runs out before a timer recording is finished, the

unit ejects the tape and switches into DVD mode

automatically. indicator flashes. Press

T-SET to activate

VCR function.

• Once the unit goes into Timer- standby mode, no VCR

functions are available until T-SET is pressed. (OUTPUT on

the front panel and

VCR on the remote control will not

function.)

• When all timer recordings are finished, the indicator

will flash.

TIMER

SET UP

INITIAL

TIMER NUMBER

START

END

DATE

CHANNEL

SPEED

--/--

--:--

9:00 10:00 11:00

Programme 1

Programme 2

Programme 3

H97A6ED(EN).fm Page 14 Wednesday, March 24, 2004 9:44 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic vcr d 620 in the language / languages: English, German as an attachment in your email.

The manual is 2,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic vcr d 620 Manual

Product: