814270
26
Zoom out
Zoom in
Previous page
1/46
Next page
TVL3770_IM 29.10.20
26
placed by the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
Do not immerse the appliance into water for cleaning. Please fol-
low the instructions as stipulated in the chapter “Cleaning”.
Unpacking the Appliance
1. Remove the appliance from its packaging.
2. Remove all of the packaging material such as foils, lling
material, cable holders and cardboard packaging.
3. Check the scope of delivery.
4. Check the appliance for any transport damage to prevent
a hazard.
NOTE:
There may still be dust or production residues on the
surface of the appliance. We recommend that you quickly
wipe off the housing with a damp cloth.
Scope of Delivery
1× Tower
Pre-assembled Philips screws on the bottom of the
tower
Half base plates
Overview of the Components
1 Speed levels
a without oscillation
b with oscillation
2 Timer and on / off switch of the appliance
Assembly Instructions
The appliance must be completely assembled before initial
operation!
NOTE:
You will need a Phillips screwdriver of medium size for
the assembly.
The screws for the assembly are pre-assembled on
the bottom of the tower.
1. Place the tower upside down and hold it down.
2. Unscrew the 3 pre-assembled screws from the bottom of
the tower. Place them within easy reach.
3. Use the rst 2 screws to mount the half of the base plate
with the mains cable guide to the tower.
4. Feed the power supply cord through the cable guide at
the edge of the base plate.
5. Insert the other half of the plate into the base plate that is
already mounted to the tower.
6. Secure the base plate to the tower with a screw.
7. Place the ventilator with the assembled base plate onto a
stable, level surface.
Start-Up
Electrical Connection
1. Before inserting the plug into the socket. Make sure that
the mains voltage to be used matches that of the appli-
ance. You can nd this information on the nameplate.
2. Connect the appliance to a duly installed protective
contact socket.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic TVL 3770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic TVL 3770 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info