NOTE:
Any smoke or smells produced during this procedure are
normal. Please ensure sufcient ventilation.
Starting-up the unit
Non-stick coating
• Lightly grease the baking surfaces before the unit is used for
the rst time.
• Use the appliance for about 10 minutes with the toasting
surfaces closed (see „Using the unit“).
• Please do not eat the rst pieces of toast/wafers or the rst
grilled food.
• After the device has cooled down, wipe the baking surfaces
off with a paper towel.
Electrical connection
Insert the plug in a duly installed 230 V/50 Hz protective contact
socket. The red mains control lamp lights up.
Using the unit
Inserting/changing of the cooking plates
Make sure that the plug is not inserted when inserting or chan-
ging the cooking plates.
WARNING:
The machine and the baking plates must have cooled down
completely!
1. Release the unlocking system (6) and fold the lid (1)
upwards.
2. If baking plates have already been inserted into the device,
press down the release buttons (4) on the insides of the
handles (5) in order to release the baking plates. Then
remove the plates.
3. Now insert the desired baking plates until they lock in place.
Please note the pins on the edge of the baking plates. The
device is supplied with one set of baking plates each for
sandwiches (A), wafers (B) and for grilling (C).
4. Close the appliance again.
Toasting sandwiches
NOTE:
Lightly spread the outside of the bread (the side coming into
contact with the toasting surfaces) with butter or margarine.
That way your sandwich can be easily removed afterwards
from the sandwich toaster.
1. Connect the device to a correctly installed 230 V, 50 Hz
socket with earthing contact. Both control lamps are now lit
up. Once the set temperature has been reached the green
control lamp (3) goes off. The red control lamp remains on
to indicate that the device is switched on.
2. Keep the baking surfaces closed during the warm-up
period. When the green control lamp (3) goes off the baking
temperature has been reached.
3. Release the lid catch and fold the lid up until it remains
open. Insert a double sandwich into each side. Gently close
the cover. Close the lid catch.
4. The green control lamp switches on and off during baking
in order to maintain the baking temperature. The baking
time depends on your individual taste. The longer the
sandwiches remain in the device, the greater the level of
browning.
5. Open the lid catch carefully and then fold up the lid. Remove
the toasted sandwiches with a wooden fork or similar item.
6. Lightly grease the baking surfaces again as required after
each baking process.
7. The baking surfaces must always be kept closed during
pauses in the baking.
Baking wafes
1. Repeat steps 1 and 3, as described under „Toasting Sand-
wiches“.
2. Open the lid (1) and place approx. 1 tablespoon of dough in
the middle of the lower baking surface. The dough should
be lled in quickly as otherwise the wafers will not brown
evenly. Please ensure that you measure in the quantity of
dough correctly, as excess dough runs over the edges and
soils the device. Gently close the cover. Do not press the
handles together.
3. Please proceed as described under „Toasting Sandwiches“,
points 4 to 7.
Recipe for waffles
5 egg yolks, 5 dessertspoons of hot water, 100 g sugar and
1 grated lemon peel should be mixed together until frothy
and then a mixture of 1/2 teaspoon baking powder and
150 g our should be stirred in. Beat the 5 egg whites stiff
and fold them into the batter.
You can nd further recipes in our recipe books or else you
can use a ready-made baking mix.
Grilling
1. Insert the grilling plates as described under “Using the unit”.
2. Continue proceeding as described under points 1 and 3
“Toasting Sandwiches”.
3. Place the food to be grilled on the lower grilling plate and
then close the lid. Please do not press the handles together.
The cooking time depends on your individual taste.
4. Once the food has been grilled enough, remove it with
a wooden fork. Do not use any pointed, sharp or cutting
objects.
CAUTION:
Do not use pointed or sharp objects to avoid damaging the
coating of the baking surfaces.
Switching Off
If you would like to interrupt operation or switch the device off,
remove the plug from the socket. The red control lamp goes off.
