401021
16
Zoom out
Zoom in
Previous page
1/28
Next page
ENGLISH
ENGLISH
16
Assembly / Dismantling
Assemble the motor housing and the hand blender as follows:
Position the hand blender with the white arrow next to the
symbol on the motor housing.
Turn the hand blender in the direction of the closed lock until
it locks in place. and must be completely in line with
one another.
In order to separate the hand blender from the motor hous-
ing, turn it in the
direction.
Using the Device
Fill the food to be mixed into the mixing bowl (max. 500 g /
300 ml). Immerse the hand blender in the mixing bowl.
Electrical connection
Check whether the electrical voltage that you intend to
use is the same as that of the machine. Details are to be
found on the label on the base.
Only connect the machine to a properly installed 230 V,
50 Hz safety socket.
Please hold the device in such a way that you can operate
pushbutton I or pushbutton II with your fi ngers.
Press one of the buttons.
Pushbutton I: This switches on the minimum speed and
cannot be regulated.
Pushbutton II: This provides the maximum speed and
cannot be regulated.
Pulsed mode is switched on by pressing the appropriate
pushbutton at intervals and then releasing it again.
The device switches itself off when the button is released.
ޥ NOTE:
Interrupt the process if the maximum speed is too slow.
Reduce the quantity of the food being mixed. First break up
any solid food.
Pull out the plug from the socket after use.
Cleaning
Preliminary Cleaning
In order to clean the mixing rod fi ll the mixing bowl with water
and operate the mixing rod as described under „Using the
Device“.
WARNING:
Always remove the plug before cleaning!
Under no circumstances should you immerse the motor
housing in water in order to clean it. Otherwise this might
result in an electric shock or fi re.
CAUTION:
Do not use a wire brush or any abrasive items.
Do not use any acidic or abrasive detergents.
Wipe the casing with a dampcloth.
If you want to clean the hand blender (mixing rod)
thoroughly, detach it from the motor housing as described
under “Assembly / Dismantling”. You can briefl y rinse the
hand blender in warm soapy water. Then dry the mixing rod
thoroughly.
WARNING:
The blade of the bar mixer is very sharp! DANGER OF
INJURY!
The mixing bowl can be cleaned in warm soapy water.
Noise development
The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 75.0 dB(A) (no limit)
Technical Data
Model: ..............................................................................SM 3282
Power supply: ............................................................230 V, 50 Hz
Power consumption: ............................................................ 300 W
Protection class: .......................................................................... ΙΙ
Speed: ................................................................. min. 15.000 rpm
................................................................ max. 17.000 rpm
Short-term operation: ...........................................................1 Min.
Net weight: .......................................................................0,680 kg
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
05-SM 3282.indd 1605-SM 3282.indd 16 17.03.2009 15:20:59 Uhr17.03.2009 15:20:59 Uhr
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic sm 3282 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic sm 3282 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info