400271
31
Zoom out
Zoom in
Previous page
1/52
Next page
GB
31
Scope of supply: 1 bar mixer with integrated blade
1 mixing vessel with lid (0.6 litres)
1 wall holder with attachment materials
Before Use
Take out all the parts carefully out of the packing. Save the packing and the
inner packing material for the whole duration of the warranty.
Clean the device before using it for the fi rst time as described in „Cleaning
and Maintenance“. Caution: The blade of the bar mixer is very sharp! DAN-
GER OF INJURY!
After use the device should be stored in the wall holder supplied.
Wall Mounting
The mixing rod can also be attached to the wall using the attachment kit
supplied.
In order to do this, measure the distance between the two recesses on the
back and drill two holes which are this distance apart. Make sure before you
start that you will not damage any electrical wires hidden in the walls!
Insert the motor housing with the mixing rod into the holding device.
Using the Device
1. Please position the bar mixer on the motor housing in such a way that the
b dot on the mixer is located below the line I. Now turn the Bar mixer in the
direction of CLOSE until both markers b are positioned one above the other.
2. Fill the food to be mixed into the mixing bowl (max. 0.6 litres). Immerse the
mixing bar fully, but only up to the MAX mark.
3. Please hold the device in such a way that you can operate pushbutton I or
pushbutton II with your fi ngers.
Pushbutton I: This switches on the minimum speed and cannot be regulated.
Pushbutton II: This provides the maximum speed and cannot be regulated.
4. Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
5. Press one of the buttons.
6. Pulsed mode is switched on by pressing the appropriate pushbutton at
intervals and then releasing it again.
7. The device switches itself off when the button is released.
8. To release the bar mixer please turn it in the opposite direction.
9. Pull out the plug from the socket after use. Clean and put the device away as
described in „Cleaning and Maintenance“.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic sm 2923 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic sm 2923 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info