484806
39
Zoom out
Zoom in
Previous page
1/66
Next page
39
GB
3. Insert 3 identical type batteries of MICRO/AAA/R03 type into the battery compartment.
Observe the correct polarity of the batteries when inserting.
Fill with corns/grains
CAUTION:
If salt grains are too coarse/large and hard, they may block the grinding mechanism. In
this case, proceed as described under “Troubleshooting → Blocked grinding mechanism”.
NOTE:
The optimum salt grain size is 3 mm.
The grains can be poured in more easily using a funnel.
4. Pour the grains into the lling slots of the storage chamber:
The storage chamber above the white grinding mechanism is designed for salt.
The storage chamber above the grey grinding mechanism is designed for pepper.
Close the housing
5. On the body and the storage chamber you will nd the symbols ( and ▲).
Position the body of the mill in such a way that the top dot lies above the triangle.
Turn the mill body clockwise until it audibly clicks into place.
The body of the mill is properly locked into place when the two points are aligned above
one another.
Adjust the grinding grade
6. Turn the wing nuts
clockwise, to grind the grain/corns ner.
anti-clockwise to grind the grains/corns coarsely.
NOTE:
If the grinding grade is too coarse, the wing nuts may come loose from the shafts. In
this case, proceed as described under “Troubleshooting → Assembling the grinding
mechanism”.
Operation
To grind the grains/corns, press one of the two buttons:
S” for salt
P” for pepper
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic PSM 3419 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic PSM 3419 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info