814148
32
Zoom out
Zoom in
Previous page
1/58
Next page
MS3693_IM 26.10.17
32
Overview of the Components / Delivery Scope
1 Lid
2 Seal ring of lid
3 Stirring tool
4 Seal ring of tool holder
5 Handle
6 Multifunction button
7 Power cable
8 Base
9 Jug
10 Tool holder
11 Froth beater
Unpacking the Appliance
1. Remove the packaging of the appliance.
2. Remove all packaging material such as plastic lm, ller
material, cable ties and box packaging.
3. Check that all the parts are in the box.
4. Do not operate the appliance if package contents is
incomplete or appear damaged. Return it immediately to
the dealer.
NOTE:
There may still be dust or production residues on the
appliance. We recommend that you clean the appliance as
described under “Cleaning”.
Notes on Use
Location
A skid-proof, even surface is suitable as installation location.
Electrical Connection
1. Ensure that your mains power corresponds with the spec-
ications of the appliance. The specications are printed
on the type label.
2. Connect the mains cable to correctly installed and earthed
socket.
Multifunction button
Press 1 x = Hot (glowing red)
Press 2 x = Warm (ashing red)
Press 3 x = Cold (glowing blue)
Press 4 x = Off
Jug
Should you remove the jug from the base during operation
and replace it on the base within approx. 1 second, the previ-
ously selected function will continue.
Seals
The tool holder and the lid are equipped with a seal. Be sure
that the seal rings are always properly secured in place.
Capacity
The jug holds between 120 and 300 ml. Refer to the scale
on the jug:
MAX 120 ml (maximum quantity for frothing)
MAX 300 ml (maximum quantity for stirring)
Frothing Milk
CAUTION:
Observe the capacity marking MAX , otherwise the milk
will foam over.
NOTE:
For optimum results use milk with 3.5 % fat content and
ll in 200 ml.
Milk with 1.5 % fat content and soy milk or lactose-free
milk does not froth as well.
Heating up Drinking Chocolate / Hot Chocolate
CAUTION:
Please add cocoa or chocolate only after you have lled
in the milk.
Cut the chocolate into little pieces and do not ll in too
much chocolate.
Do not ll above the MAX mark, otherwise the
beverage will overow.
If you want to make hot chocolate, take off the froth
beater.
Usage Table
For information about how to use the milk frother please refer
to this table:
Usage - desired result Mixing
attachment
Multifunction
button
Hot frothed milk Froth beater Press 1 x
Hot stirred milk Stirring tool Press 1 x
Steamed milk Froth beater Press 2 x
Warm stirred milk Stirring tool Press 2 x
Cold foamed milk Froth beater Press 3 x
Cold stirred milk Stirring tool Press 3 x
Hot Chocolate Stirring tool Press 1 x
Operation
1. Place the desired attachment on the tool holder. Place the
tool holder with the attachment centrically in the jug.
2. Fill the liquid into the jug.
3. Put on the lid.
4. Place the jug on the base.
5. Depending on the desired application, press the button
once, twice or three times .
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic MS 3693 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic MS 3693 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info