814172

Clatronic ME 3604 Manual

27
Zoom out
Zoom in
Previous page
1/50
Next page
27
NOTE:
Clean manufacturing residues and dust from the device as
described under “Cleaning”.
Instructions for use
Assembly / Preparations
1. Place the appliance on an even work surface.
2. Install the insert holder (3) onto the motor block (9) by twist-
ing it anticlockwise.
3. Select a suitable attachment. Insert this attachment into the
opening of the insert holder. (Page 3, Fig. a)
• Attachment for coarse cutting (blue)
• Attachment for ne cutting (red)
• Attachment for grating (purple)
• Attachment for ne rasping (green)
• Attachment for coarse rasping (yellow)
4. Lock the attachment with the lock (11): Set it onto the drive
shaft and tighten it by turning it counterclockwise. (Page 3,
Fig. b)
5. Place a bowl under the insert holder to collect the cut or
grated food.
6. Remove the peel from the food if necessary. The peel
could clog the insert holder.
7. Chop up large pieces of food to be able to ll them into the
insert holder without a problem.
NOTE about the selection of the insert:
If the result of the chopping should not be satisfactory, try it
with a different insert. Attach a rasp instead of the grater, for
example.
Disassembly
1. Remove the lock by turning it clockwise. Remove the lock
and the attachment.
2. Release the insert holder from the motor block by turning it
clockwise.
Electric operation
1. Before you plug the mains plug into the outlet, check
whether the system voltage that you want to use, matches
the one of the appliance. You will nd information about it
on the type plate.
2. Connect the appliance to a correctly installed grounded
outlet.
Turning on/off
• You can turn the appliance on with the switch (10).
• The appliance will turn off when you release the switch.
CAUTION: Short-term operation
Observe the following operation times:
• Hard food like for example carrots: Max. 2 minutes;
• Soft food like for example cucumbers: Max. 5 minutes.
• Always let the appliance cool down for approx. 90 secon-
ds between two operations.
Operation
NOTE:
Peel the food, if necessary chop large pieces.
1. Fit the desired insert.
2. Connect the appliance to a properly installed isolated
ground receptacle.
3. Fill the food into the feed neck.
4. Keep the switch pressed with one hand to turn on the appli-
ance.
5. Press the food down with the pusher. Pay attention to the
attened side of the pusher.
WARNING:
Always use the supplied pusher. Never put your ngers or
tools into the feed neck!
Ending operation
Disconnect the plug from the outlet.
Cleaning
WARNING:
• Always remove the power cord before cleaning.
• Never immerse the motor block in water. It could result
in an electric shock or re.
• The cutting surfaces of the inserts are sharp. Injury may
occur! Always touch the inserts on the plastic.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic ME 3604 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic ME 3604 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info