Manual Clatronic mc 1032 (page 32 of 46) (English, German, Dutch, French, Italian, Polish, Spanish)

160353

Zoom out

Zoom in

1/46

ENGLISH

is kept pressed down in stop mode the

machine quickly plays through the songs

until the desired track is reached. When the

/ II PLAY/PAUSE button is pressed the

track begins to play back.

STOP (7/1)

The CD stops.

REPEAT (8/4)

Press once = (the REP emits a ﬁ xed light) the current

track is repeated continuously.

Press twice = (the REP ALL emits a ﬁ xed light) the whole

CD is played continuously.

Press three times = all functions are cancelled. The normal

mode is resumed.

Programmed Play

This can be used to program any desired sequence of tracks.

1. Press the

STOP

key (7/1).

2. Press the PROG(RAM) key (9/3). The number „01“ (storage

location) and the symbol PROGRAM ﬂ ash in the display.

Use the SKIP DOWN/SKIP UP (SKIP+/SKIP-) buttons

(19/10/2) to select the desired track and then press the

PROG(RAM) button again. The display changes to memory

slot 02.

3. Select the next track with the SKIP DOWN/SKIP UP (SKIP+/

SKIP-) key and press the PROG(RAM) key again. Repeat

the procedure until all the desired tracks are selected.

ޥ NOTE:

Once the storage capacity of the tracks to be programmed

has been reached, „- -“ ﬂ ashes in the display.

4. Press the

/ II PLAY/PAUSE key (6/5). The playback starts.

The ﬁ rst track number selected appears in the display

together with the letter

and the word PROGRAM ﬂ ashes.

Press this button to pause brieﬂ y the playback.

5. Press once the

STOP

key (7/1) to stop the playback

while retaining the program. The PROGRAM control lamp

goes out.

6. To resume the playback of the program press ﬁ rst the

PROG(RAM) key once and then the

/ II PLAY/PAUSE key.

7. To delete the program (in stop mode) ﬁ rst press the

PROG(RAM) button and then the

STOP button.

The device stops automatically once the entire sequence of

programmed tracks is completed. The programmed order of

tracks remains in the memory until you change to a different

mode, remove the CD from the CD compartment or switch off

the device.

It is also possible to combine the programmed tracks with the

REPEAT function. After you have programmed and started

the device, please press the REPEAT button (8/4) up to three

times and then you can use the functions as described under

„REPEAT“.

ޥ NOTE:

Please note these instructions for playing back CDs and

CDRs in MP3 format!

The device is not able to play back MP3 ﬁ les. The CD

begins to turn, but the sound cannot be heard.

Please note:

There are a number of different recording and compression

methods, as well as quality differences between CDs and self-

recorded CDs.

Furthermore, the music industry does not adhere to ﬁ xed

standards (copy protection).

For these reasons that there may occasionally be problems with

the playback of CDs. This is not a malfunction of the device.

Cleaning and Maintenance

• Always remove the mains plug before cleaning the machine.

• Any marks on the surface can be wiped off with a slightly

damp cloth without any additives.

ޥ NOTE: COMPACT DISKS

• This device is able to play CDs with a diameter of

8 cm and 12 cm.

ޥ NOTE:

Only place one disc in the CD compartment at a time.

• Only audio CDs, CD-R and CD-RW disks can be played

on this machine.

• Always place the CD into the CD compartment with the

label facing upwards. Compact discs can only be played

on one side.

• Fingerprints and dust should be carefully removed from

the recorded side of the CD (the side without the label)

with a soft cloth. Wipe off in straight lines from the centre

to the edge.

• After being played, CDs should be returned to their case

so that they do not become scratched.

• Do not expose CDs to direct sunlight, high humidity levels

or prolonged high temperatures in order to prevent them

from warping.

• Do not adhere any paper to the CD or write on it.

• Do not spray any cleaning agents or antistatic sprays on to

the CD as in the case of phonographs.

Troubleshooting

Symptoms Course Solution

CD can not be

played back.

CD is not inserted

or inserted incor-

rectly.

Ensure that the

disc is inserted with

the label facing

upwards.

CD jumps during

playback.

Check the disc for

ﬁ ngerprints, dirt or

scratches.

Check the disc for

ﬁ ngerprints, dirt or

scratches.

05-MC 1032 CD.indd 3205-MC 1032 CD.indd 32 20.11.2007 14:49:48 Uhr20.11.2007 14:49:48 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic mc 1032 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic mc 1032 Manual

Product: